Δημοσιεύσεις

 

ΤΕΧΝΟΛΟΓΙΚΟ ΕΚΠΑΙΔΕΥΤΙΚΟ ΙΔΡΥΜΑ ΚΕΝΤΡΙΚΗΣ ΜΑΚΕΔΟΝΙΑΣ

ΤΜΗΜΑ ΜΗΧΑΝΟΛΟΓΩΝ ΜΗΧΑΝΙΚΩΝ

 

 

ΕΠΙΣΤΗΜΟΝΙΚΕΣ ΔΗΜΟΣΙΕΥΣΕΙΣ ΜΕΛΩΝ ΔΕΠ

ΣΕΡΡΕΣ, ΟΚΤΩΒΡΙΟΣ 2018


ΜΕΛΗ ΔΕΠ – ΓΝΩΣΤΙΚΑ ΑΝΤΙΚΕΙΜΕΝΑ – ΕΡΕΥΝΗΤΙΚΟ ΕΡΓΟ


 

  • Ανθυμίδης Κωνσταντίνος (Ph.D. in Mechanical Engineering), Αναπληρωτής Καθηγητής με γνωστικό αντικείμενο και ερευνητικό έργο στις «Επιφανειακές Κατεργασίες – Χυτεύσεις – Συγκολλήσεις».

Δημοσιεύσεις σε διεθνούς κύρους επιστημονικά περιοδικά με κριτές

  1. G. Anthymidis, E. Stergioudis, D. N. Tsipas, «Boriding in a fluidized bed reactor», Materials Letters 51, 156-160 (2001).
  2. G. Anthymidis, E. Stergioudis, D. N. Tsipas, «Boriding of titanium alloys in a fluidized bed reactor», Journal of Materials Science Letters 20, 2067-2069 (2001).
  3. G. Anthymidis, P. Zinoviadis, D. Roussos, D. N. Tsipas, «Boriding of nickel in a fluidized bed reactor», Materials Research Bulletin 37, 515-522 (2002).
  4. G. Anthymidis, G. Stergioudis, D. N. Tsipas, «Boride coatings on non-ferrous materials in a fluidized bed reactor and their properties», Science and Technology of Advanced Materials 3, 303-311 (2002).
  5. G. Anthymidis, E. Stergioudis, P. Zinoviadis, D. Roussos, D. N. Tsipas, «Boriding of ferrous and non-ferrous metals and alloys in fluidized bed reactor», Surface Engineering 18, 1-5 (2002).
  6. G. Anthymidis, N. Maragoudakis, G. Stergioudis, O. Haidar, D. N. Tsipas, «A comparative study of boride coatings obtained by pack cementation method and by fluidized bed technology», Materials Letters 57, 2399-2403 (2003).
  7. N. Tsipas, K. G. Anthymidis, Y. Flitris, «Deposition of hard and/or corrosion resistant, single and multi-element coatings on ferrous and nonferrous alloys in a fluidized bed reactor», Journal of Materials Processing Technology 134, 145-152 (2003).
  8. Agrianidis, K. G. Anthymidis, C. David, D. N. Tsipas, «Deposition of coatings containing Si and B on steels in a CVD fluidized bed reactor», WIT Transactions on Engineering Sciences 49, 195-200 (2005).
  9. David, K. G. Anthymidis, P. Agrianidis, D. N. Tsipas, «Determination of the fatigue behavior of coatings by means of an improved impact testing evaluation procedure», WIT Transactions on Engineering Sciences 57, 13-19 (2007).
  10. David, K. G. Anthymidis, P. Agrianidis, D. N. Tsipas, «Determination of the fatigue behavior of aluminide coatings by means of the impact testing method», Key Engineering Materials 348-349, 645-648 (2007).
  11. David, K. G. Anthymidis, P. Agrianidis, D. N. Tsipas, «Determination of the fatigue resistance of HVOF thermal spray WC-CoCr coatings by means of impact testing», Journal of Testing and Evaluation 35, 630-633 (2007).
  12. David, K. G. Anthymidis, P. Agrianidis, G. Petropoulos, «Characterization and tribological properties of boride coatings of steels in a fluidized bed reactor», Industrial Lubrication and Tribology 60, 31–36 (2008).
  13. Agrianidis, C. David, K. G. Anthymidis, M. Ekhrawat, «Interregional technology transfer on advanced materials and renewable energy systems», Journal of Materials Methods and Technologies 2, 4–10 (2008).
  14. G. Anthymidis, C. David, D. N. Tsipas, «Fatigue resistance assessment of slurry coating steel substrate compounds under cyclic loading», Key Engineering Material 385-387, 133-136 (2008).
  15. Agrianidis, K. G. Anthymidis, C. David, «Reinforcement of Aluminum by TiB dissolution», Key Engineering Materials 385-387, 785-788 (2008).
  16. David, M. A. Athanasiou, K. G. Anthymidis, P. K. Gotsis, «Impact fatigue failure investigation of HVOF coatings», Journal of ASTM International 5, 1-8 (2008).
  17. G. Anthymidis, C. David, D. N. Tsipas, «Evaluation of the fatigue behavior of aluminide coating steel substrate compounds by means of the impact testing method», Materials and Manufacturing Processes 24, 1–4 (2009).
  18. Agrianidis, T. Agrianidis, K. G. Anthymidis and A. Trakali, «Mechanical properties of Aluminum metal matrix composites», Key Engineering Materials 417-418, 341-344 (2010).
  19. G. Anthymidis, A. Balouktsis, C. David, A. Trakali, «Wear of cutting tools used in milling treatments», Key Engineering Materials 465, 165-168 (2011).
  20. G. Anthymidis, C. David, D. N. Tsipas, «Evaluation of the fatigue behavior of Aluminide coating steel substrate compounds by means of the impact testing method», Materials and Manufacturing Processes 26, 58-61 (2011).
  21. G. Anthymidis, C. David, A. Trakali, D.N. Tsipas, «Evaluation of the fatigue resistance of chromium slurry coating steel substrate compounds by means of an improved impact testing procedure», Key Engineering Materials 488-489, 420-423 (2012).
  22. G. Anthymidis, C. David, A. Trakali, P. Agrianidis, «Characterization of Al metal matrix composites produced by the stir-casting method», Key Engineering Materials 577-578, 85-88 (2014).
  23. G. Anthymidis, C. David, A. Trakali, D. N. Tsipas, «Siliconizing in a fluidized bed reactor», Key Engineering Materials 592-593, 409-412 (2014).
  24. G. Anthymidis, C. David, P. Agrianidis, A. Trakali, «Production of Al metal matrix composites by the stir-casting method», Key Engineering Materials 592-593, 614-617 (2014).
  25. G. Anthymidis, A. Trakali, D. N. Tsipas, «Single and multi-element coatings in a fluidized bed reactor», Solid State Phenomena 258, 379-382 (2017).

 

Δημοσιεύσεις σε πρακτικά διεθνών συνεδρίων με κριτές

  1. Stergioudis, H. Morawiec, K. G. Anthymidis, D. N. Tsipas, «Boride coatings on Ti-Ni alloys in a fluidized bed reactor», XIX Conference on Applied Crystallography, 1-4 September 2003, Krakow, Poland, pp. 360 -363 (2003).
  2. G. Anthymidis, G. Stergioudis, H. Lefakis, D. N. Tsipas, «Surface treatments using fluidized bed technology», International Conference on Advanced Metallic Materials, 5 – 7 November 2003, Smolenice, Slovakia, pp. 1-4 (2003).
  3. David, K. G Anthymidis, D. N. Tsipas, «The impact testing procedure a capable method to investigate the fatigue resistance and the viscoelastic properties of coating substrate compounds», International Conference of Influence of Traditional Mathematics and Mechanics on Modern Science and Technology, Messini, Greece, 24 – 28 May 2004, pp. 279 – 285 (2004).
  4. Petropoulos, C. David, K. G. Anthymidis, «Boriding of steels in a fluidized bed reactor», First Manufacturing Engineering Society International Conference, Calatayud, Spain, 19 – 21 September 2005, pp. 45-49 (2005).
  5. David, P. Agrianidis, K. G. Anthymidis, D. N. Tsipas, «Impact testing: A capable method to investigate fatigue resistance», 16th European Conference of Fracture (ECF16), Alexandroupolis, Greece, 3 – 7 July 2006, pp. 219 – 220 (2006).
  6. Agrianidis, K. G. Anthymidis, C. David, A. Agrianidis, «Reinforcement of Aluminum matrix by Fe – TiB dissolution», 7th International Conference on the Assessment of Reliability of Materials and Structures: Problems and Solutions, St. Petersburg, Russia, 17-20 June 2008, pp. 4 – 7 (2008).
  7. G. Anthymidis, P. Agrianidis, C. David, A. Agrianidis, «Production of Aluminum-Steel alloy matrix composites by the stir-casting method», Annals of DAAAM for 2008 & Proceedings of the 19th International DAAAM Symposium, B. Katalinic (Ed.), DAAAM International, Vienna, Austria, 22-25 October 2008, pp. 14 – 15.
  8. David, K. G. Anthymidis, D. N. Tsipas, «A comparative study of the fatigue resistance of aluminide coatings on P91 steel substrate under cyclic impact loading», 9th International Conference on Meso-mechanics, 13-17 May 2007, VVF les Badines, Presqu’ Ile de Giens, 83408 HYERES LES PALMIERS, France, pp. 721 – 728 (2007).
  9. G. Anthymidis, C. David, A. Trakali and P. Agrianidis, «Characterization of Al metal matrix composites produced by the stir-casting method», 12th International Conference on Fracture and Damage Mechanics, Alghero, Sardinia, Italy, 2013
  10. G. Anthymidis, A. Trakali, C. David, and D. Tsipas, «Siliconizing in a fluidized bed reactor», 7th International Conference on Materials Structure & Micromechanics of Fracture, 1-3 July 2013, Brno, Czech Republic
  11. G. Anthymidis, P. Agrianidis, G. Stergioudis, D. N. Tsipas, «Reinforcement of Aluminum Matrix by Iron – Silicon – Chromium dissolution», MSMF8, 27 – 29 June 2016, Brno, Czech Republic (2016).

 

  • Γκεϊβανίδης Σάββας (Ph.D. in Mechanical Engineering), Επίκουρος Καθηγητής, με γνωστικό αντικείμενο και ερευνητικό έργο στις «Μηχανές Εσωτερικής Καύσης – Συστήματα Κίνησης Οχημάτων».

Δημοσιεύσεις σε διεθνούς κύρους επιστημονικά περιοδικά με κριτές

  1. Geivanidis S, Pistikopoulos P, Samaras Z., «Effect on exhaust emissions by the use of methyl-cyclopentadienyl manganese tri-carbonyl (MMT) fuel additive and other lead replacement gasolines», Science of the Total Environment 305, 129-141 (2003).
  2. Geivanidis S, Samaras Z, «Development of a dynamic model for the reconstruction of tailpipe emissions from measurements on a constant volume sampling dilution system», Measurement Science and Technology 19, 015404 (2008).
  3. Joumard R, Laurikko J, Le Han T, Geivanidis S, Samaras Z, Oláh Z, Devaux P, André J M, Cornelis E, Rouveirolles P, Lacour S, Prati M V, Vermeulen R, Zallinger M, «Accuracy of exhaust emissions measurements on chassis dynamometer», Journal of Air and Waste Management Association (2008).
  4. Ntziachristos L., Samaras Z., Kouridis C., Hassel D., McCrae I., Hickman J., Zierock K.H, Keller M., Andre M., Winther M., Gorissen N., Boulter P., Joumard R., Rijkeboer R., Geivanidis S., Hausberger S., «Exhaust emissions from road transport. EMEP/EEA air pollutant emission inventory guidebook», updated May 2012, European Environmental Agency, Copenhagen, Denmark.
  5. Samaras Z., Vouitsis I., Geivanidis S., «Current and Near-term Automotive Engine Trends – CI», invited in Encyclopedia of Automotive Engineering, David Crolla, David Foster and Toshio Kobayashi (eds), John Wiley & Sons, Ltd and FISITA (2012).
  6. Bouilly J., Mohammadi A., Iida Y., Hashimoto H., Geivanidis S., Samaras Z., «Biodiesel Stability and its Effects on Diesel Fuel Injection Equipment», SAE Technical Paper 2012-01-0860, 2012, doi:10.4271/2012-01-0860
  7. Rose, K., Hamje, H., Jansen, L., Fittavolini, C., Clark, R., Cardenas Almena, M. D., Katsaounis, D., Samaras, C., Geivanidis, S., Samaras, Z., «Impact of FAME Content on the Regeneration Frequency of Diesel Particulate Filters (DPFs)», SAE Int. J. Fuels & Lubricants 7(2), (2014).
  8. Vouitsis, I., Geivanidis, S., Samaras, Z., «Liquid biofuels in Greece—Current status in production and research», Journal of Renewable and Sustainable Energy, 6, 022703 (2014).
  9. Geivanidis S., Saltas E., Samaras Z., “A novel versatile methodology for the assessment of the effects of alternative fuels on engine durability”, Transportation Research Procedia, Volume 14, 1097–1103 (2016).
  10. Saltas E., Bouilly J., Geivanidis S., Samaras Z., Mohammadi A., Iida Y., “Investigation of the effects of biodiesel aging on the degradation of common rail fuel injection systems”, Fuel 200, 357-370 (2017).
  11. Fragkiadoulakis P., Geivanidis S., Samaras Z, “Modeling a resistive soot sensor through particle deposition mechanisms”, Journal of Aerosol Science accepted (2017).
  12. Fragkiadoulakis P., Kontses D., Geivanidis S., Samaras Z., “Application of a resistive soot sensor physical model to steady state and transient data”, Journal of Aerosol Science under review (2018).

 

Δημοσιεύσεις σε πρακτικά διεθνών συνεδρίων με κριτές

  1. Geivanidis S., Samaras Z., «Investigation of the emission degradation of Euro III and Euro IV gasoline vehicles», Proceedings of the 14th International Transport and Air Pollution Symposium (TAP 2005), Graz, Austria, 2005.
  2. Joumard R., J. Laurikko, S. Geivanidis, Z. Samaras, Z. Oláh, M. Weilenman, JM. André, E. Cornelis, M. Gribe, S. Lacour, MV. Prati, R. Vermeulen & M. Zallinger (2006): «Accuracy of exhaust emissions measurements on vehicle bench». 2nd conf. Environment & Transport, incl. 15th conf. Transport and Air Pollution, 12-14 June 2006, Reims, France. Proceedings, actes Inrets, n°107, vol. 1, Arcueil, France, p. 119-126
  3. Fontaras G., Geivanidis S., Samaras Z., «Development and evaluation of hybrid vehicle emission and fuel consumption factors based on measurements over real world cycles», Proceedings of the 15th International Transport and Air Pollution Symposium (TAP 2006), Reims, France, 2006.
  4. Joumard R., J. Laurikko, S. Geivanidis, Z. Samaras, Z. Oláh, M. Weilenman, JM. André, E. Cornelis, M. Gribe, S. Lacour, MV. Prati, R. Vermeulen & M. Zallinger (2006): «Accuracy of exhaust emissions measurements on vehicle bench», FISITA 2006, World Automotive Congress, 22-27 October, Yokohama, Japan – Paper reference: F2006P409, 2006
  5. Joumard R, André JM., Rapone M., Zallinger M., Kljun N., André M., Samaras Z., Roujol S., Laurikko J., Weilenmann M., Markewitz K., Geivanidis S., Ajtay D., Paturel L.: «Emission factor modeling for light duty vehicles within the European ARTEMIS model». Proceedings of the 16th International Conference Transport and Air Pollution (TAP2008), 16-17 June 2008, Graz, Austria
  6. Kousoulidou, L. Ntziachristos, S. Gkeivanidis, Z. Samaras, V. Franco, P. Dilara, «Validation of the COPERT road emission inventory model with real-use data», US EPA 19th Annual International Emission Inventory Conference “Emissions Inventories – Informing Emerging Issues”, San Antonio (2010)
  7. Geivanidis S., Samaras Z., Bezergianni S., Bouilly J., Mohammadi A., «Methodology for the Investigation of Biodiesel Effects on Critical Diesel Engine Components», International Conference on Biofuels for Sustainable Development of Southern Europe, 19-20 November 2012, Thessaloniki, Greece, www.bio4sud.gr
  8. Samaras Z., Geivanidis S., Vonk W., «Testing of soot sensors for DPF failure monitoring». In 17th ETH Conference on Combustion generated nanoparticles, Zürich, Switzerland, 23–26 June 2013.
  9. Geivanidis S., Samaras Z., Sindano H., Anderson J., Vonk W., «PM OBD monitoring requirements in EU and US, Different challenges due to type-approval testing requirements and vehicle fleet characteristics», Diesel Power-trains 3.0, International Conference, October 28th-29th, 2014, Montabaur, Germany.
  10. Fragkiadoulakis P., Mertzis D., Geivanidis S., Samaras Z., “Prediction of resistive soot sensor behavior in diesel exhaust via 3D simulation of soot deposition”, 6th BETA CAE International Conference, June 10, 2015, Thessaloniki, Greece.
  11. Gkantonas S., Fragkiadoulakis P., Geivanidis S., Samaras Z., “Analysis of the exhaust flow inside a resistive soot sensor tip and simulation model”, 2016 ANSYS Convergence Conference, June 30, 2016, Athens, Greece.
  12. Geivanidis S., “Correction of transient emission signal dynamics for in-lab and RDE measurements”, 4th International Conference, Real Driving Emissions, IQPC, 25 – 28 October 2016, Berlin, Germany.

 

  • Γκότσης Πασχάλης (Ph.D. in Materials Science & Engineering), Καθηγητής Α’ Βαθμίδας – Former Research Scientist at NASA Glenn Research Center, Cleveland OH (USA), με γνωστικό αντικείμενο και ερευνητικό έργο στην «Εφαρμοσμένη Μηχανική και Δυναμική Μηχανολογικών Κατασκευών».

Δημοσιεύσεις σε διεθνούς κύρους επιστημονικά περιοδικά με κριτές

  1. K. Gotsis, A. H. Shabaik and G. H. Sines, «Elastoplastic analysis of an Aluminum alloy matrix reinforced with Silicon Carbide fibers packed in a hexagonal alloy», International Journal of Computers and Structures 41, 345-353 (1992).
  2. K. Gotsis, A. H. Shabaik and G. H. Sines, «Elastoplastic analysis of an Aluminum alloy matrix reinforced with Silicon Carbide fibers», International Journal of Computers and Structures: Technical Note 43, 795-802 (1992).
  3. K. Gotsis and C. C. Chamis, «Combined bending and thermal fatigue of high temperatures MMC: Computational simulation», International Journal of Damage Mechanics 1, 290-319 (1992).
  4. K. Mital, C. C. Chamis and P. K. Gotsis, «Micro-fracture in high temperature metal matrix laminates», Composite Science and Technology Journal 50, 59-70 (1994).
  5. K. Gotsis and J. D. Guptill, «Fiber composite thin shell subjected to thermal buckling loads», International Journal of Computers and Structures 53, 1263-1274 (1994).
  6. K. Gotsis, «Structural optimization of shell structures», International Journal of Computers and Structures 53, 1263-1274 (1994).
  7. K. Gotsis and J.D. Guptill, «Free vibration of fiber composite thin shells in a hot environment», Journal of Reinforced Plastic and Composites 14, 143-163 (1995).
  8. K. Gotsis, C. C. Chamis and L. Minnetyan, «Computational simulation of the damage of composite thin-shell structures subjected to mechanical loads», Journal of Theoretical and Applied Fracture Mechanics 25, 211-224 (1996).
  9. K. Gotsis, C. C. Chamis and L. Minnetyan, «Progressive fracture of fiber composite build-up structures», Journal of Reinforced Plastics and Composites 16, 183-198 (1997).
  10. K. Gotsis, C. C. Chamis and L. Minnetyan, «Progressive fracture of blade containment composite structures», Journal of Reinforced Plastics and Composites 16, 1407-1424 (1997).
  11. Minnetyan, P. K. Gotsis and C. C. Chamis, «Progressive damage and fracture of stiffened and un-stiffened composite pressure vessels», Journal of Reinforced Plastics and Composites 16, 1711-1724 (1997).
  12. Chamis and P. K. Gotsis, «Laminate analogy for composite enhanced concrete structures», Journal of Advanced Materials 29, 3-10 (1997).
  13. K. Gotsis, C. C. Chamis and L. Minnetyan, «Prediction of composite laminate fracture: Micromechanics and progressive fracture», Composite Science and Technology Journal 58, 1137-1149 (1998).
  14. K. Gotsis, C. C. Chamis and L. Minnetyan, «Progressive fracture of fiber composite thin-shell structures under internal pressure and axial loads», International Journal of Damage Mechanics 7, 332-350 (1998).
  15. C. Chamis, P. K. Gotsis and L. Minnetyan, «Progressive fracture and damage tolerance of composite pressure vessels», Journal of Advanced Materials 30, 22-26 (1998).
  16. Minnetyan, C. C. Chamis and P. K. Gotsis, «Damage progression in bolted composites», Journal of Thermoplastic Composite Materials 11, 231-248 (1998).
  17. C. Chamis, P. K. Gotsis and S. K. Mital, «Meso-mechanics and meso-structures: A matter of scale», Journal of Thermoplastic Composite Materials 11, 478-490 (1998).
  18. C. Chamis and P. K. Gotsis, «Infrastructure retrofit design via Composite Mechanics», Journal of Advanced Materials 31, 33-36 (1999).
  19. C. Chamis, P. L. N. Murthy, P. K. Gotsis and S. K. Mital, «Telescoping composite mechanics for composite behavior simulation», Computer Methods in Applied Mechanics and Engineering Journal 185, 399-411 (2000).
  20. K. Gotsis, C. C. Chamis, L. Minnetyan, «Application of progressive fracture analysis for predicting failure envelopes and stress-strain behaviors of composite laminates: A comparison with experimental results», Composites Science and Technology 62, 1545-1559 (2002).
  21. C. Chamis and P. K. Gotsis, «Application of Composite Mechanics to composite enhanced concrete structures», International Journal of Advances in Mechanics and Applications of industrial Materials 1, 41-54 (2007).
  22. K. Gotsis, C. C. Chamis, C. K. Gotsis and E. Mouratidis, «Progressive fracture of [0/90/±θ]S composite structure under uniform pressure», International Journal of Advances in Mechanics and Applications of industrial Materials 1, 77-83 (2008).
  23. David, K. G. Anthymidis, M. Athanasiou and P. K. Gotsis, «Impact fatigue failure modes of HVOF coatings», Journal of ASTM International 5, 1-8, (2008).
  24. K. Gotsis, C. C. Chamis, C. David and F. Abdi, «Progressive fracture of laminated composite stiffened plate», Journal of Theoretical and Applied Fracture Mechanics 51, 144–147 (2009).
  25. A. Tsipas, D. N. Tsipas, C. David and P. K. Gotsis, «Boronizing of metallic materials: A Review», Journal of Materials Science and Technology 23, 160–184 (2015).

 

Δημοσιεύσεις σε πρακτικά διεθνών συνεδρίων με κριτές

  1. K. Gotsis and C. C. Chamis, «Combined bending and thermal fatigue of high temperatures MMC: Computational simulation», 16th Thermo-mechanical Fatigue (TMF) Workshop, at NASA Lewis Research Center, on June 1991.
  2. K. Gotsis, C.C. Chamis and L. Minnetyan, «Effect of combined loads on the durability of a stiffened adhesively bonded composite structure», Proceeding of the 36th AIAA/ASME/ ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, New Orleans, LA, Part 2, pp. 1083-1092, April 10-13, 1995.
  3. Minnetyan and P. K. Gotsis, «Progressive fracture in adhesively bonded concentric cylinders», Proceedings of the 40th International SAMPE CONFposium and Exhibition, Anaheim, California, Vol. 40, Book 1, pp. 849-860, May 8-11, 1995.
  4. K. Gotsis, «Computational simulation of fiber composite thin shell structures in a hydrothermal environment», Proceedings of the 5th Europe-Japan Bilateral Colloquium on Composite Material, Corfu, Greece, Sept. 18-22, 1995.
  5. C. Chamis, P. K. Gotsis and L. Minnetyan, «Damage progression in bolted composite structures», Proceedings of the 1995 USAF Structural Integrity Program Conference, 28-30 November 1995, San Antonio, Texas, WL-TR-4094, Vol. II, pp. 663-679, 1996.
  6. C. Chamis, P. K. Gotsis and L. Minnetyan, «Progressive damage and fracture of adhesively bonded fiber composite pipe joints», Proceedings of the Conference and Exhibition: CONFposium on Composite Materials Design and Analysis, Houston, Texas, January 29-February 2, 1996. Book V, pp. 401-408, 1996.
  7. C. Chamis, P. K. Gotsis and L. Minnetyan, «Damage tolerance of composite pressurized shells», Proceedings of the 37th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Salt Lake City, Utah, April 15-17, 1996, Part 4, pp. 2112-2121.
  8. K. Gotsis, C. C. Chamis and L. Minnetyan, «Defect tolerance of pressurized fiber composite shell structures», Proceedings of the 41st International SAMPE CONFposium and Exhibition, Anaheim, California, March 25-28, 1996, Vol. 41, pp. 450-461.
  9. Minnetyan, D. Huang, C. C. Chamis and P. K. Gotsis, «Progressive fracture of composite subjected to Iosepescu shear test», Proceedings of the ASTM 13th CONFposium on Composite Materials: Testing and Design, Orlando, Florida, May 20-21, 1996.
  10. C. Chamis and P.K. Gotsis, «Infrastructure for coupled multidisciplinary problems in engine structures», Conference Proceedings at the AIAA/NASA/USAF Multidisciplinary Analysis & Optimization CONFposium, Sept. 4-6, 1996, Bellevue, Washington. AIAA-96-4147-CP, Part 2, pp. 1409-1418.
  11. L. McKnight, M. S. Hartle, F. E. Sagendorph, P. K. Gotsis and C. C. Chamis, «Code certification process for multidisciplinary analysis/design optimization», Conference Proceedings at the AIAA/NASA/USAF Multidisciplinary Analysis & Optimization CONFposium, Sept. 4 – 6, 1996, Bellevue, Washington. AIAA-96-4031-CP, Part 1, pp. 448-458.
  12. C. Chamis, P. K. Gotsis and L. Minnetyan, «Structural integrity of composite containment structures», Conference Proceedings of the 1996 USAF Structural Integrity Program Conference, Dec. 3-5, 1996, San Antonio, Texas.
  13. Gotsis and C. C. Chamis, «Laminate analogy for composites application to infrastructures», Conference Proceedings at the 42nd International SAMPE CONFposium and Exhibition, Anaheim, California, May 5-8, 1997, pp. 947-956.
  14. Gotsis, C. C. Chamis and L. Minnetyan, «Progressive fracture of blade containment composite structures», Proceedings of the 11th DOP/NASA/FAA Conference on Fibrous Composites in Structural Design, Fort Worth, Texas, August 26-29, 1996.
  15. C. Chamis, P. K. Gotsis and L. Minnetyan. «Progressive fracture and damage tolerance of composite pressure vessels», Conference Proceedings at the International Composites EXPO ’97 in Nashville, Tennessee, Jan. 27-29, 1997, session 5-C/1 to 8.
  16. C. Chamis and P. K. Gotsis, «Laminate analogy for composite enhanced concrete structures», Proceedings of the First Hellenic Conference on Composite Materials and Structures, Xanthi, Greece, July 2-5, 1997, vol. II, pp. 31-50.
  17. C. Chamis and P. K. Gotsis, «Infrastructure retrofit design via composite mechanics», Conference Proceedings of the International Composites, EXPO ’98 – ICE ’98, in Nashville, Tennessee, January 19-21, 1998.
  18. K. Gotsis and C. C. Chamis, «Computational simulation of concrete structures enhanced with fiber composites», Invited paper for the CONFposium on Materials, Design and Analysis. Energy Resource and Technology Conference, Houston, Texas, February 2-4, 1998.
  19. Minnetyan, R. A. Lund, C. C. Chamis and P. K. Gotsis, «Evaluation of progressive fracture in woven and non-woven composites panels», Proceedings at the 1997 USAF Aircraft Structural Integrity Program Conference, San Antonio, Texas, December 2- 4, 1997.
  20. C. Chamis, P. K. Gotsis and L. Minnetyan, «Probabilistic assessment of fracture in composite pressure vessels», Conference Proceedings for the 1998 ASME/JSME Pressure Vessels and Piping Conference, San Diego, California, July 26-30, 1998.
  21. Vidakis, A. Antoniadis, C. Savakis and P. K. Gotsis, «Simulation of ball end tools milling», 16th Conference on Production Research ICPR-16, on 29 July –3 August 2001, Prague, Czech Republic.
  22. K. Gotsis, C. C. Chamis, C. David and F. Abdi, «Progressive fracture of laminated composite stiffened plate», 9th Conference on Meso-mechanics (MESO2007), Presquile de Giens, France, May 13-17, 2007.
  23. K. Gotsis, C. C. Chamis, C. K. Gotsis and E. Mouratidis, «Progressive fracture of [0/90/±θ]S composite structure under uniform pressure», International Conference on Advances and Trends of engineering Materials and their Applications (ATEMA2007), Montreal, Canada, August 6-10, 2007.
  24. K. Gotsis, C. C. Chamis, F. Abdi and K. Tsouros, «Progressive fracture of laminated fiber-reinforced composite stiffened plate under pressure», COMP-07: 6th International Symposium on Advanced Composite Technologies. Corfu, Greece, 16-18 May 2007.
  25. K. Gotsis, C. C. Chamis, K. Tsouros and C. David, «Damage progression of (0/90/45)S laminated fiber-reinforced composite stiffened plate under mechanical loads», 8th HSTAM International Congress on Mechanics, Patras, Greece, July 12-14, 2007.
  26. David, M. Athanasiou, K. G. Anthymidis and P. K. Gotsis, «Impact fatigue investigation of HVOF coatings», 36th ASTM National Symposium on Fatigue and Fracture Mechanics Tampa Marriot Waterside, Tampa, Florida, USA, November 14-16, 2007.
  27. K. Gotsis, «Damage progression of sandwich plate due to the residual stresses and thermo-mechanical loads», International Conference MESOMECHANICS 2008, 28 January 2008 to 1 February 2008, Cairo, Egypt.
  28. C. Chamis and P. K. Gotsis, «Composite multi-scale mechanics for composite enhanced concrete structures», 7th World Conference on Earthquake Resistant Engineering Structures, 395-407, 2009.

 

  • Δαυίδ Κωνσταντίνος (Ph.D. in Mechanical Engineering, Dr.–Ing.), Καθηγητής Α’ Βαθμίδας – Αντιπρύτανης Έρευνας και δια βίου Μάθησης του ΤΕΙ Κεντρικής Μακεδονίας, με γνωστικό αντικείμενο και ερευνητικό έργο στις «Εργαλειομηχανές – Μηχανουργική Τεχνολογία».

Δημοσιεύσεις σε διεθνούς κύρους επιστημονικά περιοδικά με κριτές

  1. David, G. Warnecke, «A correlation between cutting process and dynamics of the machine-tool-system in grinding», Transactions of the North American Manufacturing Research Institution of SME XXIV, Michigan, Ann Arbor USA, 51-56, (1996).
  2. Bouzakis, N. Vidakis, C. David, «Characterization of thin hard coatings regarding their lifetime performance and typical applications», Journal of Opto-electronics 6, 3-12, (1998).
  3. Bouzakis, N. Vidakis, C. David, «The concept of an advanced impact tester supported by evaluation software for the fatigue strength characterization of hard layered media», Thin Solid Films 355-356, 322-329, (1999).
  4. Warnecke, C. David, «A modeling method to analyze the dynamic behavior of grinding process and predicting the stability limit», Journal of Production Engineering WGP Annals VII/2, 115-120, (2000).
  5. Bouzakis, A. Lontos, Ν. Vidakis, C. David, V. Kechagias, «Determination of the creep behavior of monolayer thick plasma sprayed coatings, by means of the impact test and analytical FEM supported evaluation procedure», Thin Solid Films 377-378, 373-381 (2000).
  6. Bouzakis, N. Vidakis, A. Lontos, S. Mitsi, C. David, «Implementation of low temperature deposited coating lifetime parameters in commercial roller bearings catalogues», International Journal Surface and Coatings Technology 133-134, 489-496 (2000).
  7. Agrianidis, K. G. Anthymidis, C. David and D. N. Tsipas, «Deposition of coatings containing Si and B on steels in a CVD fluidized bed reactor», WIT Transactions on Engineering Sciences 49, 195-201 (2005).
  8. Petropoulos, N. Vaxevanidis, A. Iakovou and C. David, «Multi-parameter modeling of surface texture in ED Machining using the Design of Experiments methodology», Journal of Materials Science Forum 526, 157-162 (2006).
  9. David, K. G. Anthymidis, P. Agrianidis and D. N. Tsipas, «Determination of the fatigue behavior of aluminide coatings by means of the impact testing method», Journal of Key Engineering Materials 348-349, 645-648 (2007).
  10. David, K. G. Anthymidis and P. Agrianidis, «Determination of the fatigue resistance of HVOF-thermal spray WC-CoCr coatings», Journal of Testing and Evaluation 35, 630-633, (2007).
  11. David, K. G. Anthymidis, P. Agrianidis and D. N. Tsipas, «Determination of the fatigue behavior of coatings by means of an improved impact testing evaluation procedure», WIT Transactions on Engineering Sciences, Computational Methods and Experiments in Materials Characterization 57, 13-21 (2007).
  12. David, K. G. Anthymidis, P. Agrianidis and G. Petropoulos, «Characterization and tribological properties of Boride coatings of Steels in a fluidized bed reactor», Journal of Industrial Lubrication & Tribology 60, 31-36 (2008).
  13. Maravelakis, C. David, A. Antoniadis, A. Manios, N. Bilalis, Y. Papaharilaou, «Reverse engineering techniques for cranioplasty: A case study», Journal of Medical Engineering and Technology 32, 115-121 (2008).
  14. David, M. A. Athanasiou, K. G. Anthymidis and P. K. Gotsis, «Impact fatigue failure of HVOF coatings and modeling of the viscoelastic properties of coating-substrate compound», Journal of ASTM International 5, 233-241 (2008).
  15. G. Anthymidis, C. David and D. N. Tsipas, «Fatigue resistance assessment of slurry coating steel substrate compounds under cyclic loading», Journal of Key Engineering Materials 385-387, 133-136 (2008).
  16. Agrianidis, K. G. Anthymidis and C. David, «Reinforcement of Aluminum by TiB dissolution», Journal of Key Engineering Materials 385-387, 785-788 (2008).
  17. Agrianidis, C. David, K. G. Anthymidis, M. Ekhrawat, «Interregional technology transfer on advanced materials and renewable energy systems», Journal of Materials Methods and Technologies 2, 4 – 10 (2008).
  18. K. Gotsis, C. C. Chamis, C. David, and F. Abdi, «Progressive fracture of laminated fiber-reinforced composite stiffened plate», International Journal of Theoretical & Applied Fracture Mechanics 51, 144-147 (2009).
  19. J. Kakaletsis, C. David, C. G. Karayiannis, «Effectiveness of seismic retrofitting techniques for bare and in-filled R/C frames», Journal of Structural Engineering and Mechanics 39, 4-11 (2011).
  20. G. Anthymidis, C. David and D. N. Tsipas, «Evaluation of the fatigue behavior of aluminide coating steel substrate compounds by means of the impact testing method», Journal of Materials and Manufacturing Processes 26, 58-61 (2011).
  21. Friderikos, G. Maliaris, C. David, and I. Tsiafis, «An investigation of cutting-edge failure due to chip crush in carbide dry hobbling using the finite element method», Journal of Advanced Manufacturing Technology 57, 297-306 (2011).
  22. A. Athanasiou, G. C. Anagnostopoulos, A. C. Iliopoulos, G. P. Pavlos, and C. N. David, «Enhanced ULF radiation observed by DEMETER two months around the strong 2010 Haiti earthquake», Journal of Natural Hazards and Earth Systems Sciences 11, 1091–1098 (2011).
  23. G. Anthymidis, A. Balouktsis, C. David, and A. Trakali, «Wear of cutting tools used in milling treatments», Journal of Key Engineering Materials 465, 165-168 (2011).
  24. G. Anthymidis, C. David, A. Trakali, D. N. Tsipas, «Evaluation of the fatigue resistance of chromium slurry coating steel substrate compounds by means of an improved impact testing procedure», Key Engineering Materials 488-489, 420-423 (2012).
  25. A. Grammatikos, E. Z. Kordatos, T. E. Matikas, C. David, A. S. Paipetis, «Current injection phase thermography for low-velocity impact damage identification in composite laminates», Materials and Design 55, 429-441 (2014).
  26. G. Anthymidis, C. David, A. Trakali and P. Agrianidis, «Characterization of Al metal matrix composites produced by the stir-casting method», Key Engineering Materials 577-578, 85-88 (2014).
  27. G. Anthymidis, C. David, A. Trakali, D. Tsipas, «Siliconizing in a fluidized bed reactor», Key Engineering Materials 592-593, 409-412 (2014).
  28. G. Anthymidis, C. David, P. Agrianidis, A. Trakali, «Production of Al Metal Matrix Composites by the Stir-casting Method», Key Engineering Materials 592-593, 614-617 (2014).
  29. Μ. A. Athanasiou, G. C. Anagnostopoulos, C. David and G. G. Machairidis, «The ULF electromagnetic radiation observed in the topside ionosphere above boundaries of tectonic plates», International Journal of Research in Geo-physics [ISSN 2038-9663] (2014).
  30. Korlos, O. Friderikos, G. Mansour, C. David, D. Sagris, «Orthogonal cutting of Ti6Al4V alloy using experimental and theoretical analysis», Applied Mechanics & Materials 809-810, 183-188 (2015).
  31. A. Tsipas, D. N. Tsipas, C. David and P. K. Gotsis, «Boronizing of metallic materials: A review», Journal of Materials Science and Technology 23, 160–184 (2015).
  32. Constantin, C. David, «Multiplexed delay compensation and circular buffer method for moving average filtering of signal acquired from tactile sensors in a mechatronics system for walking analysis», “HIDRAULICA” (No. 4/2015) Magazine of Hydraulics, Pneumatics, Tribology, Ecology, Sensorics, Mechatronics, ISSN 1453 – 7303 (2015).
  33. Korlos, O. Friderikos, D. Sagris, C. David, G. Mansour, «Experimental analysis of Ti6Al4V orthogonal cutting», Key Engineering Materials 665, 17-20 (2016).
  34. Mansour, K. Tzikas, D. Tzetzis, A. Korlos, D. Sagris, C. David, «Experimental and numerical investigation on the torsional behavior of filament winding-manufactured composite tubes», Applied Mechanics and Materials 834, 173-178, (2016).
  35. Korlos, D. Tzetzis, G. Mansour, D. Sagris, C. David, «The delamination effect of drilling and electro-discharge machining on the tensile strength of woven composites as studied by X-ray computed tomography», Int. J. of Machining and Machinability of Materials 18, 426-448 (2016).
  36. C. Vlachou, J. S. Lioumbas, C. David, D. Chasapis, Th. D. Karapantsios, «Effect of channel height and mass flux on highly sub-cooled horizontal flow boiling», Journal of Experimental Thermal and Fluid Science 83, 157–168 (2017).

 

Δημοσιεύσεις σε πρακτικά διεθνών συνεδρίων με κριτές

  1. Bouzakis, C. David, N. Vidakis, «Development of an Impact Tester and of its software to determine the fatigue strength of hard coatings», Annals of 9th International DAAAM Symposium “Intelligent Manufacturing, Automation & Networking”, Cluj-Napoca, Romania, 22-24th October 1998, pp. 59-60.
  2. Bouzakis, C. David, N. Vidakis, «Development of testing and evaluation procedures to determine the fatigue strength of hard coatings», Proceedings of 3rd International Conference of Tribology, BALKANTRIB ’99, Vol. III, Sinaia – Romania, pp. 291-302.
  3. Bouzakis, C. David, N. Vidakis, «Prediction of the fatigue performance of coated systems through an advanced impact tester and the software supported evaluation of experimental data», Proceedings of 1st International Conference “THE Coatings in Manufacturing Engineering”, Thessaloniki 14-15 October 1999, pp.213-222.
  4. Bouzakis, N. Vidakis, C. David, A. Siganos, T. Leyendecker, G. Erkens, R. Wenke, «Determination of the mechanical properties and fatigue resistance of multilayer PVD coatings on various substrates», Proceedings of 1st International Conference “THE Coatings in Manufacturing Engineering”, 14-15 October, Thessaloniki, 1999, pp. 237-248.
  5. Bouzakis, A. Lontos, N. Vidakis, K. David, V. Kechagias, «Determination of mechanical properties of thick coatings produced by plasma spray method», Proceedings of 1st International Conference “THE Coatings in Manufacturing Engineering”, Thessaloniki 14-15 October 1999, pp. 269-282.
  6. Bouzakis, N. Vidakis, C. David, N. Mihailidis, A. Lontos, «Thin hard coatings fatigue prediction and typical applications in cutting tools and machine elements», Proceedings of the Third International Conference for Meso-mechanics, Editor G. C. Sih, Tsingua University Press, Beijing 100084, P.R. China, vol. II 2000, pp. 567-578.
  7. Bouzakis, N. Vidakis, A. Lontos, S. Mitsi, C. David, «Implementation of low temperature deposited coating fatigue parameters in commercial roller bearings catalogues», The First Mediterranean Tribology Conference, 8-9 November, Jerusalem, Israel, 2000.
  8. Bouzakis, A. Lontos, C. David, V. Kechagias, «Creep behaviour prediction and optimum design of plasma sprayed coatings with intermediate bonding layer», International Conference “THE” Coatings 2001, Hannover, pp. C1/1-10.
  9. David, A. Balouktsis, D. Paschaloudis and E. Mouratidis, «Insight into the reform of Technological Education Institutes – A case study from Greece», Proceedings of 3rd International Congress on Engineering Education, 30 June – 5 July 2002, Caledonian University, Glasgow Scotland, United Kingdom, pp. 277-280.
  10. Balouktsis, C. David, E. Mouratidis, K. Anastasiou, D. Paschaloudis, «Internationalization of Technological Education – Strengths, weaknesses, opportunities and threats of Greek Technological Institutes», 3rd European – Latin American Conference on Engineering Education, 3-9 November 2002, Havana, Cuba.
  11. Bouzakis, A. Lontos, N. Vidakis, C. David, V. Kechagias, «Determination of creep behavior of monolayer thick plasma spray coatings, by means of the impact test and analytical FEM supported evaluation procedure», Proceedings of 3rd International Conference “THE Coatings”, 28-29 November 2002, Thessaloniki, Greece, pp. 383-394
  12. Bouzakis, N. Vidakis, A. Lontos, S. Mitsi, C. David, «Implementation of low temperature deposited coating fatigue parameters in commercial roller bearings catalogues», Proceedings of 1st International Conference on Manufacturing Engineering ICMEN, 3-4 October 2002, Sani Chalkidiki, Greece, pp. 777-788.
  13. Mouratidis, K. Anastasiou, A. Balouktsis, C. David, D. Paschaloudis, «Towards competitive higher technological education: quality assurance and SWOT analysis of higher technological institutes», Proceedings of 7th Baltic region Seminar on Engineering Education, St. Petersburg, Russia 4-6 September 2003, pp. 29-33.
  14. Kehris, D. Paschaloudis, C. David, G. Fragidis, «Lab-Assistant: A web-based general-purpose software for the delivery and administration of computer-based laboratory sessions», Proceedings of 6th International Conference on Computer Based Learning in Science, Volume I: New technologies and their Applications in Education, 5-10 July 2003 Nicosia, Cyprus, pp. 392-399
  15. Kehris, D. Paschaloudis, C. David, M. Theodoridou, «Development, delivery and administration of computer-based laboratory sessions over the Web», Proceedings of the 3rd International Conference on New Horizons in Industry and Education. 28-29 August 2003, Santorini, Greece, pp. 326-334.
  16. David, K. G. Anthymidis, D. N. Tsipas, «The impact testing procedure a capable method to investigate the fatigue resistance and the viscoelastic properties of coating substrate compounds», Proceedings of International Conference of influence of traditional mathematics and mechanics on modern science and technology, organized by National Technical University of Athens and Lehigh University of Bethlehem USA, 24-28 May 2004, Messini, Greece, pp. 279-285
  17. David, P. Agrianidis, «Boriding of steels in a fluidized bed reactor», Proceedings of 15th International DAAAM Symposium Intelligent Manufacturing and Automation, 3 – 6 November 2004, Vienna, Austria, pp. 91-92.
  18. David, D. Paschaloudis, E. Mouratidis, S. Dimitriadis, G. Marinos, and P. Pantelidis, «Improvement in engineering education due to introduction of ICT based courses and curricula», 8th UICEE Annual Conference on Engineering Education, Kingston, Jamaica, 7-11 February 2005.
  19. Petropoulos, C. David, K. G. Anthymidis, «Boriding of steels in a fluidized bed reactor», First Manufacturing Engineering Society International Conference, Calatayud, Spain, 19 – 21 September 2005.
  20. David, K. G. Anthymidis, D. N. Tsipas, «A comparative study of the fatigue resistance of aluminide coatings on P91 steel substrate under cyclic impact loading», Proceedings of 9th International Conference on Meso-mechanics, 13-17 May 2007 France, pp. 721-728.
  21. K. Gotsis, C. C. Chamis, C. David, D. Xie and F. Abdi, «Progressive fracture of laminated fiber-reinforced composite stiffened plate under thermo-mechanical loads», Proceedings of 9th International Conference on Meso-mechanics, 13-17 May 2007 France, pp. 509-518.
  22. Konstantinidis, M. Ekhrawat, C. David, H. Omar, D. Papadopoulos and D. N. Tsipas, «Design, modeling and construction of prototype structures for heat exchanger used in PV/T systems in terms of materials and process selection», Proceedings of IWTPV ’06, Prague, Czech Republic, 30-31 March 2006, pp. 19-24.
  23. David, P. Agrianidis, A. Balouktsis and M. Theodoridou, «Interregional technology transfer on advanced materials and renewable energy systems», Proceedings of the 5th International Conference on New Horizons in Industry, Business and Education. 30-31 August 2007, Rhodes, Greece, pp. 287-291.
  24. Balouktsis, T. Karapantsios, D. Chassapis, C. David, K. Anastasiou and A. Balouktsis, «Methodology for load matching and optimization of directly coupled PV-pumping systems», Proceedings of the 7th WSEAS/IASME International Conference on Electric Power Systems, High Voltages, Electric Machines, 21-23 November 2007, Venice, Italy.
  25. K. Gotsis, C. C. Chamis, K. Tsouros and C. David, «Damage progression of [00/900/+-450]s laminated fiber-reinforced composite stiffened plate under mechanical load», Proceedings of 8th HSTAM International Congress on Mechanics, July 12-14, 2007 Patras, Greece, pp. 291-297.
  26. Paschaloudis, M. Tsourela, C. David, J. Kaliakatsos and P. Pantelidis, «Knowledge sharing across higher-education institutes in interregional countries – The case of an academic network between Greece and Bulgaria», Proceedings of the 4th International Conference on Intellectual Capital Knowledge management & Organizational Learning, October 15-16th 2007, Cape Town, South Africa, pp. 315-319.
  27. G. Anthymidis, P. Agrianidis, C. David and A. Agrianidis, «Production of Aluminum-Steel alloy matrix composites by the stir-casting method», Proceedings of 19th International DAAAM Symposium 2008, Vienna, Austria, October 22-25, 2008, pp. 14-15.
  28. Agrianidis, K. G. Anthymidis, C. David and A. P. Agrianidis, «Reinforcement of Aluminum Matrix by Fe-TiB Dissolution», Proceedings of RELMAS 2008, 7th International Conference on “Assessment of Reliability of Materials and Structures: Problems and Solutions”, St. Petersburg, Russia, June 17-20, 2008, Vol. 1, pp. 4-7.
  29. David, P. Agrianidis, K. G. Anthymidis, D. N. Tsipas, «Impact testing: A capable method to investigate the fatigue resistance», Proceedings of the 16th European Conference of Fracture (ECF16), Alexandroupolis, Greece, July 3 – 7, 2006, pp. 219-220.
  30. Fragidis, D. Paschaloudis and C. David, «Concept mapping as a tool for instructional planning and learning», Proceedings of the 4th International Conference on New Horizons in Industry and Education”. 25-26 August 2005, Corfu, Greece, pp. 247-253.
  31. David, Α. Balouktsis, P. Agrianidis, «Energy behavior of a hybrid PV/thermal water system», 6th International Conference “New Horizons in Industry, Business and Education (NHIBE 2009)” 27-28 August 2009 on Santorini Island, Greece.
  32. Savaidis, A. Savaidis, C. David, A. Antoniadis, «Fatigue Investigation of Ultrasonic Impact Treatment on Welded Structures», 31st Int. Symposium on Mechanics and Materials, May 9-14, 2010, Chania, Crete, Greece.
  33. G. Anthymidis, A. Balouktsis, C. David and A. Trakali, «Wear of cutting tools used in milling treatments», Materials Structure & Micromechanics of Fracture, Brno, Czech Republic, June 28-30, 2010.
  34. David, A. Antoniadis, O. Friderikos, D. Sagris, «Experimental and computational investigation of end-milling and development of a simulation model describing the machining process», 7th International Conference “New Horizons in Industry, Business and Education (NHIBE 2011)” 25-26 August 2011 on Chios Island, Greece
  35. Friderikos, A. Korlos, C. David, I. Tsiafis, «Investigation of shear instability in orthogonal machining of TI6AL4V alloy using the finite element method», 7th GRACM International Congress on Computational Mechanics, Athens, 30 June – 2 July 2011.
  36. Varitis, D. Sagris, C. David, A. Lontos, «Directional Variation of Trabecular Bone in the Femoral Head, a μ-CT based Approach», Proceedings of the International Conference on Bioinformatics Models, Methods and Algorithms, Bio-Informatics 2013, Barcelona – Spain, 11 – 14 February, pp. 237-241, 2013.
  37. G. Anthymidis, C. David, A. Trakali and P. Agrianidis, «Characterization of Al metal matrix composites produced by the stir-casting method», 12th International Conference on Fracture and Damage Mechanics, Alghero, Sardinia, Italy, 2013
  38. G. Anthymidis, A. Trakali, C. David, and D. Tsipas, «Siliconizing in a fluidized bed reactor», 7th International Conference on Materials Structure & Micromechanics of Fracture, 1-3 July 2013, Brno, Czech Republic.
  39. Korlos, D. Tzetzis, G. Mansour, D. Sagris, C. David, «Comparison of drilling and electro-discharge open-hole machining of carbon fiber reinforced polymers», 5th International Conference on Manufacturing Engineering (ICMEN), Thessaloniki, Greece, 1-3 Oct. 2014, pp. 41-50, 2014.
  40. Korlos, O. Friderikos, G. Mansour, C. David, D. Sagris, «Orthogonal cutting of Ti6Al4V alloy using experimental and theoretical analysis», Innovative Manufacturing Engineering International Conference, Iasi, Romania, May 21-22, 2015.
  41. Korlos, O. Friderikos, C. David, G. Mansour, D. Sagris, «Adiabatic shear band formation in orthogonal machining of Ti6Al4V», 4th International Conference of Engineering Against Failure (ICEAFIV), Skiathos, Greece, 24-26 June 2015.
  42. Friderikos, A. Korlos, C. David, D. Sagris, G. Mansour, «Formation of adiabatic shear bands in orthogonal machining of Ti6Al4V alloy», 8th GRACM International Congress on Computational Mechanics, Volos, Greece, 12-15 July 2015.
  43. Korlos, O. Friderikos, D. Sagris, C. David, G. Mansour, «Experimental analysis of Ti6Al4V orthogonal cutting», 14th International Conference on Fracture and Damage Mechanics», Budva, Montenegro, September 21-23, 2015.
  44. Mansour, K. Tzikas, D. Tzetzis, A. Korlos, D. Sagris, C. David, «Experimental and numerical investigation on the torsional behavior of filament winding-manufactured composite tubes», 17th International Conference on Applied Mathematics and Approximation Theory, ICAMAT 2015, 9-10 Nov. 2015, Venice, Italy, 2015.
  45. Dutschk, R. Kuipers, K. Kalič, C. David, Th. Karapantsios, «Wetting behavior of two waterborne polymer dispersions – polyurethane and polyester – on different polyester and glass-fiber fabrics», International Symposium SGI-FunD 2015, 29th–31st October 2015, Sofia, Bulgaria.
  46. Kozatsas, K. Kotsakis, D. Sagris, C. David, «Studying ceramic technology from inside: Micro-CT scanning of a pottery assemblage from MN of Sesklo (Thessaly, Greece) » 41st International Symposium on Archaeometry (ISA) 2016, Kalamata, Greece.
  47. David, D. Sagris, E. Stergianni, Ch. Tsiafis, I. Tsiafis, «Experimental analysis of charter vibration in micro-milling», CONFERENG 2016, Targu-Jiu, November 4-5, 2016.
  48. Toulfatzis, G. A. Pantazopoulos, C. David, D. Sagris, A. Paipetis, «Design of experiments for the optimization of cutting force and surface roughness of lead-free brass alloys», International Conference EUROMAT 2017, 17-22 September 2017, Thessaloniki, Greece.
  49. Stergianni, D. Sagris, C. Tsiafis, C. David, I. Tsiafis, «Influence Analysis of Micro-milling vibration phenomena on work-piece topomorphy», 9th International Congress on Precision Machining ICPM 2017 September 6-9, 2017 Athens, Greece.
  50. Sagris, C. David, E. Stergianni, C. Tsiafis, I. Tsiafis, «Computational and experimental analysis of machine tool vibrations in micro-milling», International Conference on Innovative Manufacturing Engineering and Energy IManE&E, May 25-26 Iaşi România, 2017.
  51. Stergianni, C. Tsiafis, D. Sagris, C. David, I. Tsiafis, «Computational and experimental analysis of machine tool vibrational phenomena in micro-milling process and their influence on work-piece topomorphy», 6th International Conference on Manufacturing Engineering ICMEN, 5-6 October 2017 Thessaloniki, Greece.

 

  • Κατσανεβάκης Αθανάσιος (Ph.D. in Chemical and Process Engineering), Αναπληρωτής Καθηγητής, με γνωστικό αντικείμενο και ερευνητικό έργο στα «Ενεργειακά Συστήματα – Θερμικές Μηχανές».

Δημοσιεύσεις σε διεθνούς κύρους επιστημονικά περιοδικά με κριτές

  1. Tsamaslis, G. Karagiorgis, A. Ν. Katsanevakis, «Hybridization of photovoltaics with pumped storage hydroelectricity – An approach to increase RES penetration and achieve grid benefits: Application in the island of Cyprus», Journal of Power Technologies 4, 336–341 (2017).
  2. Μ. Fletcher, D. K. Iatridis, A. N. Katsanevakis, A. A. Lappas, O. Monachos, M. Pourkashanian and A. Williams, «A new approach to optimizing ceramic Kiln operation utilizing industrial gas turbine exhaust gases», Int. J. on Energy for a Clean Environment, accepted for publication in April 2003.
  3. N. Katsanevakis and J. M. Smith, «Power Input and mean flow changes in two-phase agitation», IChemE Symposium Series 146, ISBN 085295 425 5, pp. 187-198 (1999).
  4. N. Katsanevakis, J. M. Smith, «Velocity and turbulence measurements in two-phase boiling stirred tanks», IChemE Symposium Series 136, ISBN 085295 329 1, pp. 603-610 (1994).
  5. M. Smith, A.N. Katsanevakis, «Impeller power demand in mechanically-agitated boiling systems», Trans IChemE 71, part A (1993).

 

Δημοσιεύσεις σε πρακτικά διεθνών συνεδρίων με κριτές

  1. Stamakos, A. N. Katsanevakis, «Industry standard compliant offshore wind speed measurements, on floating platform», European Wind Energy Conference, Hamburg, Germany, September 2016.
  2. Α. N. Katsanevakis, A. Gkanias, «Measurements for wind industry: Moving beyond the 10-minute averaged data», European Wind Energy Conference, Hamburg, Germany, September 2016.
  3. Α. N. Katsanevakis, D. Stamakos, K. Tifkitsis, P. Tsamaslis, I. Tsiafis, A. Gkanias, A. Kalfas, «Wind speed measurements in offshore applications using both mast and LIDAR on a floating platform», European Wind Energy Conference, Paris, France, November 2015.
  4. Stamakos, K. Tifkitsis, P. Tsamaslis, A. Gkanias, I. Tsiafis, A. Kalfas, A. N. Katsanevakis, «On the wave induced effects on the movement of wind speed floating measurement platforms», European Wind Energy Conference, Paris, France, November 2015.
  5. Stamakos, K. Tifkitsis, P. Tsamaslis, A. Gkanias, I. Tsiafis, A. Kalfas, A. N. Katsanevakis, «Offshore wind speed measurements from a floating platform: Is current industry standards applicable? » American Offshore Wind Energy Conference, Baltimore MD, USA, September 2015.
  6. Α. N. Katsanevakis, A. Gkanias, «On the uncertainty related with remote sensing short term wind measurements», European Wind Energy Conference, Wien, Austria, February 2013.
  7. Α. Gkanias, A. Ν. Katsanevakis, «Investigation of the wind tunnel blockage effect on a cup anemometer calibration», European Wind Energy Conference, Copenhagen, Denmark, April 2012.
  8. Α. Gkanias, A. Ν. Katsanevakis, G. Karagiannis, «Investigation of CFD accuracy in a multiple mast and LIDAR site», European Wind Energy Conference, Copenhagen, Denmark, April 2012.
  9. Α. Gkanias, Κ. Papatolios, D. Konstandinidis, G. Karagiannis, A. N. Katsanevakis, «A comparison of wind flow over complex terrain using CFD simulation and LIDAR measurements», European Wind Energy Conference, Brussels, Belgium, 2011.
  10. Α. Katsanevakis, G. N. Karagiannis, V. Sinnis, D. Konstandinidis, «Wind velocity modeling for wind park energy yield predictions: Achievements and limitations», European Wind Energy Conference, Warsaw, Poland, 2010.
  11. N. Katsanevakis, «Cogeneration in the Food Industry», European Cogeneration Conference 2007, Brussels, 9-10 May 2007.
  12. Α. Katsanevakis, G. N. Karagiannis, J. N. Katsanevakis, «Long distance wind potential predictions: Validation of modeling results vs simultaneous measurements», European Wind Energy Conference 2006, 28 Feb – 2 March 2006, Athens, Greece.
  13. N. Katsanevakis, J. Katsanevakis, G. Koutsoupas, «Operating data of the world’s first cogeneration of high temperature heat and power – CHTHP – plant», International Clean-Air Conference, Lisbon, June 2005.
  14. Α. N. Katsanevakis, P. Tsaliki, «International oil prices and production cost of the Greek industry», 9th Conference on Entrepreneurship, Competitiveness and Growth in South-East Europe, Univ. of Macedonia, Greece, Sep 2004.
  15. M. Fletcher, M. Pourkashanian, A. Williams, A. N. Katsanevakis, «Ceramic Kilns fired by industrial gas turbine exhaust gases», 13th IFRF Member’s Conference, Noordwijkkerhout, The Netherlands, May 15-18, 2001.
  16. Α. Ν. Katsanevakis, P. Tsemberlidis, L. Fletcher, M. Pourkashanian, D. Sofialidis, J. Katsanevakis, A. Lappas, «Application of the decentralized combustion mode with turbine exhaust gases –DCM/TEG- cycle in the Glass Industry – A novel approach for CHP integration in high temperature demanding processes», 1st Balkan Conference on Glass Science and Technology, Volos, Greece, 9-10 Oct. 2000.
  17. M. Fletcher, M. Pourkashanian, A. Williams, A. N. Katsanevakis, O. Faltsi, «A chemical kinetic study of a low-oxygen content air-Methane opposed diffusion flame», 2nd meeting of the Combustion Institute (Greek Section), Thessaloniki, 26-27 November 1999.
  18. Faltsi, A. Ν. Katsanevakis, P. N. Wild, C. Bratianu, «CFD modeling of diffusion lames – current developments», 3rd International Conference of Turbo-machinery, Bucharest, Romania, July 1998.
  19. Α. N. Katsanevakis, O. Faltsi, P. N. Wild, J. Katsanevakis, «Combustion off-gases recuperator modeling: CFD predictions and full-scale measurements», International Conference on Computational Methods and Experimental Measurements VIII, Rhodes, Greece, May 1997.
  20. M. Smith, C. Stephen, A. N. Katsanevakis, S. Allinson, R. Lake, «Sparged agitated boiling reactors», IChemE Research Event, Manchester, January 1994.
  21. Α. N. Katsanevakis, J. M. Smith, «Impeller power demand in mechanically-agitated boiling systems», IChemE Research Event, Birmingham 6-7 January 1993.

 

  • Κλεΐδης Κωνσταντίνος (Ph.D. in Astrophysics & Cosmology), Αναπληρωτής Καθηγητής – Πρόεδρος του Τμήματος, με γνωστικό αντικείμενο και ερευνητικό έργο στα «Εφαρμοσμένα Μαθηματικά».

Δημοσιεύσεις σε διεθνούς κύρους επιστημονικά περιοδικά με κριτές

  1. Kleidis, H. Varvoglis and D. B. Papadopoulos, «Interaction of charged particles with gravitational waves of various polarizations and directions of propagation», A&A 275, 309 (1993).
  2. Kleidis, H. Varvoglis, D. B. Papadopoulos and F. P. Esposito, «Non-linear interaction of a gravitational wave with a distribution of particles», A&A 294, 313 (1995).
  3. Kleidis, H. Varvoglis and D. B. Papadopoulos, «Conditions on the stability of the external space solutions in a higher-dimensional quadratic theory of gravity», J. Math. Phys. 37, 4025 (1996).
  4. Kleidis, H. Varvoglis and D. B. Papadopoulos, «Parametric resonant acceleration of particles by gravitational waves», Class. Quantum Grav. 13, 2547 (1996).
  5. Kleidis and D. B. Papadopoulos, «On the adiabatic expansion of the visible space in a higher-dimensional cosmology», Gen. Relativ. Gravit. 29, 275 (1997).
  6. Anastasiadis, K. Kleidis and H. Varvoglis, «Kinetic description of particle interaction with a gravitational wave», Gen. Relativ. Gravit. 29, 499 (1997).
  7. Kleidis, Ap. Kuiroukidis, D. B. Papadopoulos and H. Varvoglis, «Higher-dimensional models in gravitational theories of quartic Lagrangians», J. Math. Phys. 38, 3166 (1997).
  8. Kleidis and D. B. Papadopoulos, «Cosmological solutions in Kaluza-Klein theories of quadratic Lagrangians», J. Math. Phys. 38, 3189 (1997).
  9. Kleidis and D. B. Papadopoulos, «Particle creation, renormalizability conditions and the mass-energy spectrum in gravity theories of quadratic Lagrangians», Class. Quantum Grav. 15, 2217 (1998).
  10. Io. Giannakis, K. Kleidis, Ap. Kuiroukidis and D. B. Papadopoulos, «Anisotropic null-string cosmologies», Mod. Lett. A 13, 3169 (1998).
  11. Kuiroukidis, K. Kleidis and D. B. Papadopoulos, «Null strings in Bianchi I models: Dynamical anisotropy damping and consequences», Class. Quantum Grav. 16, 2763 (1999).
  12. Kleidis and N. K. Spyrou, «Geodesic motions versus hydrodynamic flows: Dynamical equivalence and consequences», Class. Quantum Grav. 17, 2965 (2000).
  13. Kuiroukidis, K. Kleidis and D. B. Papadopoulos, «String theory and higher-order gravity theories in relativity and modern cosmology», Revue des Questions Scientifiques 172, 383 (2001).
  14. Kleidis, Ap. Kuiroukidis and D. B. Papadopoulos, «Interactive quadratic gravity», Phys. Lett. B 546, 112 (2002).
  15. Kleidis, Ap. Kuiroukidis, D. B. Papadopoulos and L. Vlahos, «Magnetohydrodynamics and plasma cosmology», IJTP 46, 2283 (2007).
  16. Kuiroukidis, K. Kleidis and D. B. Papadopoulos, «Alfven modes driven non-linearly by metric perturbations in anisotropic magnetized cosmologies», IJMP A 22, 2197 (2007).
  17. Kuiroukidis, K. Kleidis, D. B. Papadopoulos and L. Vlahos, «Excitation of MHD waves in magnetized, anisotropic cosmologies», A&A 471, 409 (2007).
  18. Kleidis, A. Kuiroukidis, D. B. Papadopoulos and L. Vlahos, «Dynamo effects in magnetized ideal-plasma cosmologies», IJMP A 23, 1697 (2008).
  19. Kleidis, D. B. Papadopoulos, E. Verdaguer and L. Vlahos, «Imprints of cosmic strings on the cosmological gravitational-wave background», Phys. Rev. D 78, 024027 (2008).
  20. Kleidis, A. Kuiroukidis, D. B. Papadopoulos and L. Vlahos, «Gravito-magnetic instabilities in anisotropically expanding fluids», IJMP A 23, 4467 (2008).
  21. Kleidis, Ap. Kuiroukidis, P. Nerantzi and D. B. Papadopoulos, «Charged cosmic strings interacting with gravitational and electro-magnetic waves», Gen. Relativ. Gravit. 42, 31 (2010).
  22. Kleidis and N. K. Spyrou, «A conventional approach to the dark-energy concept», A&A 529, Α26 (2011).
  23. K. Oikonomou and K. Kleidis, «Testing extra dimensions with boundaries using Newton’s law modifications», IJMP A26, 4633 (2011).
  24. Kleidis, Ap. Kuiroukidis, D. B. Papadopoulos and E. Verdaguer, «Graviton production in the scaling of a long-cosmic-string network», Phys. Rev. D84, 124044 (2011).
  25. K. Spyrou and K. Kleidis, «Hydrodynamic flows versus geodesic motions in contemporary Astrophysics and Cosmology», in “New Developments in Hydrodynamics Research”, J. Ibragimov & M. A. Anisimov (eds.), Nova Science Publishers Inc. ISBN 978-1-62081-223-5, pp. 113 – 158 (2012).
  26. Kleidis and V. K. Oikonomou, «Central charge extended supersymmetric structures for fundamental fermions around non-Abelian vortices», IJTP 53, 2623 (2014).
  27. Kleidis and V. K. Oikonomou, «Extended supersymmetric quantum-mechanic algebras in scattering states of fermions off domain walls», IJTP 54, 933 (2015).
  28. Kleidis and N. K. Spyrou, «Polytropic dark matter flows illuminate dark energy and accelerated expansion», A&A 576, A23 (2015).
  29. G. Contopoulos, F. P. Esposito, K. Kleidis, D. B Papadopoulos, and L. Witten, «Generating solutions to the Einstein-Maxwell equations», IJMP D 24, 1550101 (2015).
  30. Kleidis and V. K. Oikonomou, «Shadowing effects in Newton’s law from compact extra dimensions», Int. J. Geom. Methods Mod. Phys. 13, 1550137 (2016).
  31. G. Contopoulos, F. P. Esposito, K. Kleidis, D. B Papadopoulos, and L. Witten, «Generating solutions to the Einstein field equations», IJMP D 25, 1650022 (2016).
  32. Kleidis and N. K. Spyrou, «Dark energy: The shadowy reflection of dark matter», Entropy 18, 094 (2016).
  33. Kleidis and V. K. Oikonomou, «Effects of finite-time singularities on gravitational waves», A&SS 361, 326 (2016).
  34. Kleidis and V. K. Oikonomou, «Unification of late- and early-time acceleration, with that of the intermediate eras, by scalar fields», A&SS 362, 74 (2017).
  35. Kleidis and N. K. Spyrou, «Cosmological perturbations in the ΛCDM-like limit of a polytropic dark matter model», A&A 606, Α116 (2017).
  36. Kleidis and V. K. Oikonomou, «LQC-corrected Gauss-Bonnett singular Cosmology», Int. J. Geom. Methods Mod. Phys. 15, 1850064 (2018).
  37. Kleidis and V. K. Oikonomou, «LQC scalar-field models», Int. J. Geom. Methods Mod. Phys. 15, 1850071 (2018).
  38. Kleidis and V. K. Oikonomou, «Scalar field assisted f(R) gravity inflation», Int. J. Geom. Methods Mod. Phys. 15, 1850137 (2018).
  39. Kleidis and V. K. Oikonomou, «Autonomous dynamical system description of de Sitter evolution in f(R) – Φ gravity», Int. J. Geom. Methods Mod. Phys. accepted October 1 (2018).
  40. L. Vozikis, K. Kleidis and S. Papaioannou, «The power spectrum indicator: A new, efficient method for the early detection of chaos», J. Phys. A submitted August 2 (2018).

 

Δημοσιεύσεις σε πρακτικά διεθνών συνεδρίων με κριτές

  1. Kleidis and N. K. Spyrou, «On the nature of nuclear galactic masses», in Proceedings of the 4th Hellenic Astronomical Conference, Pythagoreion Samos, September 16 – 18, 1999 (ed. J. Seimenis), p. 45 (2001).
  2. Kuiroukidis, K. Kleidis and D. B. Papadopoulos, «String propagation in Bianchi Type I models», in Proceedings of the 4th Hellenic Astronomical Conference, Pythagoreion Samos, September 16 – 18, 1999 (ed. J. Seimenis), p. 359 (2001).
  3. Kleidis, «Introducing quadratic gravity», in Proceedings of the International Workshop on “Cosmology and Gravitational Physics”, Thessaloniki, Greece, December 15 – 16, 2005 (eds. N. K. Spyrou, N. Stergioulas and C. Tsagas), Aristotle University of Thessaloniki Conference Series, p. 103 (2006).
  4. Kleidis and D. B. Papadopoulos, «Exploring the Universe on the back of a gravitational wave», in Proceedings of the International Workshop on “Cosmology and Gravitational Physics”, Thessaloniki, Greece, December 15 – 16, 2005 (eds. N. K. Spyrou, N. Stergioulas and C. Tsagas), Aristotle University of Thessaloniki Conference Series, p. 77 (2006).
  5. Kleidis, P. Nerantzi and D. B. Papadopoulos, «Kerr – NUT seeds for cosmic strings», in Proceedings of the International Conference on “Differential Geometry and Dynamical Systems”, Bucharest, Romania, October 5 – 7, 2007 (ed. V. Balán), Balkan Society of Geometers, Geometry Balkan Press, p. 110 (2008).
  6. Kleidis, D. B. Papadopoulos and L. Vlahos, «Generalized Jeans-type instabilities in a homogeneous and anisotropic Universe», in «Spanish Relativity Meeting» 2008, at Salamanca, Spain, (ed. E. Verdaguer) 1 – 8 September 2008 (poster session).
  7. Kleidis, «Gravitational waves versus cosmic strings», Journal of Physics: Conference Series 189, 012021 (2009).
  8. Kleidis and N. K. Spyrou, «A conventional form of dark energy», Journal of Physics: Conference Series 283, 012018 (2011).
  9. Kleidis, D. Kalpaktsoglou, S. Pouros and D. K. Papakostas, «Improving the efficiency of a wind turbine using thyristor-switched series capacitors», 4th Panhellinic Conference on Electronics and Tele-communications (PACET), Xanthi, 17-18 November 2017.

 

  • Μισηρλής Δημήτριος (Ph.D. in Mechanical Engineering), Επίκουρος Καθηγητής, με γνωστικό αντικείμενο και ερευνητικό έργο σε «Θέρμανση – Ψύξη – Κλιματισμό».

Δημοσιεύσεις σε διεθνούς κύρους επιστημονικά περιοδικά με κριτές

  1. Tsinoglou, G. Koltsakis, D. Missirlis, K. Yakinthos, «Modeling of flow distribution during catalytic converter light-off», Int. J. Vehicle Design 34, 231-259 (2004).
  2. Tsinoglou, G. Koltsakis, D. Missirlis, K. Yakinthos, «Transient modeling of flow distribution in automotive catalytic converters», Applied Mathematical Modeling 28, 775-794 (2004).
  3. Missirlis, K. Yakinthos, A. Palikaras, K. Katheder, A. Goulas, «Experimental and numerical investigation of the flow field through a heat exchanger for aero-engine applications», Int. J. of Heat and Fluid Flow 26, pp. 440–458 (2005).
  4. Missirlis, K. Yakinthos, P. Storm, A. Goulas, «Modeling pressure drop of inclined flow through a heat exchanger for aero-engine applications», Int. J. of Heat and Fluid Flow 28, 512–515 (2007).
  5. Yakinthos, D. Missirlis, A. Palikaras, P. Storm, B. Simon, A. Goulas, «Optimization of the design of recuperative heat exchangers in the exhaust nozzle of an aero engine», Applied Mathematical Modeling, 31, 2524-2541 (2007).
  6. Albanakis, K. Yakinthos, K. Kritikos, D. Missirlis, A. Goulas, P. Storm, «The effect of heat transfer on the pressure drop through a heat exchanger for aero engine applications», Applied Thermal Engineering, 29, 634-644 (2009).
  7. Albanakis, D. Missirlis, N. Michailidis, K. Yakinthos, A. Goulas, H. Omar, D. Tsipas, B. Granier, «Experimental analysis of the pressure drop and heat transfer through metal foams used as volumetric receivers under concentrated solar radiation», Experimental Thermal and Fluid Science 33, 246–252 (2009).
  8. Sideridis, D. Koutsonikolas, D. Missirlis, S. Topis, S. Kaldis, G. Skodras and G. Sakellaropoulos, «Computational fluid dynamics study on the decomposition of ammonia in a selective porous membrane», Chemical Product and Process Modeling 3, Article 42, (2008).
  9. Kritikos, C. Albanakis, D. Missirlis, Z. Vlahostergios, A. Goulas, P. Storm, «Investigation of the thermal efficiency of a staggered elliptic-tube heat exchanger for aero-engine applications», Applied Thermal Engineering 30 (2010) 134–142.
  10. Martinopoulos, D. Missirlis, G. Tsilingiridis, K. Yakinthos and N. Kyriakis, «CFD modeling of a polymer solar collector», Renewable Energy 35 (2010) 1499–1508.
  11. Missirlis, S. Donnerhack, O. Seite, C. Albanakis, A. Sideridis, K. Yakinthos, A. Goulas, «Numerical development of a heat transfer and pressure drop porosity model for a heat exchanger for aero engine applications», Applied Thermal Engineering 30 (2010) 1341-1350.
  12. Michailidis, F. Stergioudi, H. Omar, E. Pavlidou, D.N. Tsipas, C. Albanakis, D. Missirlis, B. Granier, «Micro-structural characterization of oxide morphologies on Ni and Inconel foams exposed to concentrated solar radiation», Journal of Alloys & Compounds 496 (2010) 644–649.
  13. Aidarinis, D. Missirlis, K. Yakinthos, A. Goulas, «CFD modeling and LDA measurements for the air-flow in an aero-engine front bearing chamber», Journal of Engineering for Gas Turbines and Power (Vol.133, Iss.8) DOI: 10.1115/1.4002830.
  14. Kyriakou, D. Missirlis, K. Yakinthos, «Numerical modeling of the vortex breakdown phenomenon on a delta wing with trailing edge jet control», Int. J. of Heat and Fluid Flow 31 (2010) 1087–1095.
  15. Missirlis, M. Flouros, K. Yakinthos, «Heat transfer and flow field investigation of a heat exchanger for aero engine applications», Int. J. of Heat and Technology 29, 57-64 (2011).
  16. Yakinthos, D. Missirlis, A. Sideridis, Z. Vlahostergios, O. Seite, A. Goulas, «Modeling the operation of a system of recuperative heat exchangers for an aero engine with the combined use of a porosity model and a thermo mechanical model», Engineering Applications of Computational Fluid Mechanics 6, 608-621 (2012).
  17. -D. Bouzakis, F. Klocke, A. Tsouknidas, S. Kombogiannis, D. Missirlis, Z. Vlahostergios, A. Sideridis, K. Yakinthos, A. Tzevelekis, G. Stabiliev, S. Bolz, «Development of a ball valve with PVD-coated Metal-to-Metal sealing mechanism», Journal of the Balkan Tribological As-sociation 18, 390–404 (2012).
  18. Vlahostergios, D. Missirlis, K. Yakinthos, A. Goulas, «Computational modeling of vortex breakdown control on a delta wing», International Journal of Heat and Fluid Flow 39 (2013) 64–77.
  19. Michailidis, F. Stergioudi, H. Omar, D. Missirlis, Z. Vlahostergios, S. Tsipas, C. Albanakis, B. Granier, «Flow, thermal and structural application of Ni-foam as volumetric solar receiver», Solar Energy Materials & Solar Cells 109 (2013)185–191.
  20. Missirlis, G. Martinopoulos, G. Tsilingiridis, K. Yakinthos and N. Kyriakis, «Investigation of the heat transfer behavior of a polymer solar collector for different manifold configurations», Renewable Energy 68 (2014) 715-723.
  21. Vlahostergios, D. Missirlis, M. Flouros, C. Albanakis, K. Yakinthos, «Effect of turbulence intensity on the pressure drop and heat transfer in a staggered tube bundle heat exchanger», Experimental Thermal and Fluid Science 60 (2015) 75–82.
  22. Goulas, S. Donnerhack, M. Flouros, D. Misirlis, Z. Vlahostergios, K. Yakinthos, «Thermodynamics cycle analysis, pressure loss, and heat transfer assessment of a recuperative system for aero-engines», J. Eng. Gas Turbines Power 137 GTP-14-1470, (2015).
  23. Salpingidou, D. Misirlis, Z. Vlahostergios, S. Donnerhack, M. Flouros, A. Goulas, K. Yakinthos, «Investigation of the performance of different recuperative cycles for gas turbines/aero engine applications», Chemical Engineering Transactions 52, 511-516 (2016).
  24. Salpingidou, D. Misirlis, Z. Vlahostergios, M. Flouros, S. Donnerhack, K. Yakinthos, «Numerical modeling of heat exchangers in gas turbines using CFD computations and thermodynamic cycle analysis tools», Chemical Engineering Transactions 52, 517-522 (2016).
  25. Salpingidou, D. Misirlis, Z. Vlahostergios, K. Yakinthos, «Development of surrogate models for the prediction of the flow around an aircraft propeller», Int. J. Sust. Energy, 2016, DOI: 10.1080/14786451. 2016.1270283.
  26. Misirlis, Z. Vlahostergios, M. Flouros, C. Salpingidou, S. Donnerhack, A. Goulas and K. Yakinthos, «Optimization of intercooled recuperation in aero engines», Aerospace 4, 14 (2017).
  27. Salpingidou, D. Tsakmakidou, Z. Vlahostergios, D. Misirlis, M. Flouros, K. Yakinthos, «The effect of turbine blade cooling on the performance of recuperative cycles for gas turbines applications», Chemical Engineering Transactions 61, 1027-1032 (2017).
  28. Salpingidou, D. Misirlis, Z. Vlahostergios, M. Flouros, S. Donnerhack, K. Yakinthos, «Development of a heat exchanger for low pressure ratio gas turbines with the use of CFD computations and thermodynamic cycle analysis», Chemical Engineering Transactions 61, 1033-1038 (2017)
  29. Salpingidou, Z. Vlahostergios, D. Misirlis, S. Donnerhack, M. Flouros, A. Goulas, K. Yakinthos, «Thermodynamic analysis of recuperative gas turbines and aero engines», Applied Thermal Engineering 124 (2017) 250–260
  30. Salpingidou, D. Misirlis, Z. Vlahostergios, S. Donnerhack, M. Flouros, A. Goulas, K. Yakinthos, «Exergy analysis and performance assessment for different recuperative thermodynamic cycles for gas turbine applications», J. Eng. Gas Turbines Power, GTP-17-1342 (2017) doi: 10.1115/1.4038362

 

Δημοσιεύσεις σε πρακτικά διεθνών συνεδρίων με κριτές

  1. Yakinthos, D. Missirlis, A. Palikaras, A. Goulas, «Heat exchangers for aero engine applications», IMECE2006-13667, Proceedings of IMECE 2006, ASME International Mechanical Engineering Congress and Exposition, November 5-10, 2006, Chicago, Illinois USA.
  2. Seume , F. Herbst, D. Missirlis, K. Yakinthos, A. Goulas, 2006, «Numerical modeling of the unsteady interaction between probe and flow in axial turbo-machinery», The XVIII Symposium on Measuring Techniques in Turbo-machinery – Transonic and Supersonic Flow in Cascades and Turbo-machines, Thessaloniki, Greece, 21- 22 September 2006.
  3. Sideridis, D. Koutsonikolas, D. Missirlis, S. Topis, S. Kaldis, G. Skodras and G. Sakellaropoulos, 2008. «Computational fluid dynamics study on the decomposition of ammonia in a selective porous membrane», Computer Aided Process Engineering Forum 7-8 February 2008, Thessaloniki, Greece (Power-point presentation).
  4. Klocke, C. Gorgels, E. Bouzakis, D. Misirlis, K. Yakinthos, «Experimental investigation and computational fluid dynamics modeling of micro blasting of coated cutting tools», Proceedings of the 7th International Conference ‘’ΤΗΕ’’ Coatings in Manufacturing Engineering, 1-3 October 2008, Chalkidiki, Greece.
  5. Topis, D. Koutsonikolas, A. Sideridis, D. Missirlis, S. Kaldis, G. Skodras and G. Sakellaropoulos, «CFD study in a selective porous CMR for NH3 decomposition», Post ICIM10 Symposium, Catalytic Membrane Reactors in Mt. Fuji, Gotemba, Shizuoka, Japan, August 22-24, 2008 (Poster presentation).
  6. Yakinthos, S. Donnerhack, D. Missirlis, O. Seite, P. Storm, «Derivation of an anisotropic model for the pressure loss through a heat exchanger for aero engine applications», Proceedings of ASME Turbo Expo 2009: Power for Land, Sea and Air, GT2009, June 8-12, 2009, Orlando, Florida, USA.
  7. Albanakis, D. Missirlis, P. Storm, K. Yakinthos, A. Goulas, «Experimental investigation of the effect of heat transfer on pressure drop for a heat exchanger for aero engine applications», ExHFT-7: 7th World Conference on Experimental Heat Transfer, Fluid Mechanics and Thermodynamics, 28 June – 03 July 2009, Krakow, Poland.
  8. Kyriakou, D. Missirlis, K. Yakinthos, «Numerical modeling of the vortex breakdown phenomenon on a delta wing with trailing edge jet control», Conference on Modeling Fluid Flow (CMFF’09): The 14th International Conference on Fluid Flow Technologies, Budapest, Hungary, September 9-12, 2009.
  9. Missirlis, O. Seite, S. Donnerhack, K. Yakinthos, «Heat and fluid flow investigations on a heat exchanger for aero engine applications», ISABE 2009, 19th ISABE Conference, September 7-11, 2009 Montreal, Canada.
  10. Vlahostergios Z., Missirlis D., Yakinthos K., «Application of turbulence modeling on delta wing vortex breakdown control», 3rd GACM Colloquium on Computational Mechanics, 21-23 September 2009 Hannover, Germany (Power-point presentation).
  11. Missirlis, K. Yakinthos, O. Seite, A. Goulas, «Modeling an installation of recuperative heat exchangers for an aero engine», GT2010-22263, Proceedings of ASME Turbo Expo 2010: Power for Land, Sea and Air, GT2010, June 14-18, 2010, Glasgow, UK.Aidarinis, D. Missirlis, K. Yakinthos, A. Goulas, «CFD modeling and LDA measurements for the air-flow in an aero-engine front bearing chamber», GT2010-23294, Proceedings of ASME Turbo Expo 2010: Power for Land, Sea and Air, GT2010, June 14-18, 2010, Glasgow, UK.
  12. Yakinthos, D. Missirlis, O. Seite, Z. Vlahostergios, A. Goulas, «Modeling the operation of a heat exchanger for aero engine applications for real engine operating conditions», 8th International ERCOFTAC Symposium on Engineering Turbulence Modeling and Measurements, 9 – 11 June 2010, Marseille, France.
  13. Missirlis, K. Yakinthos, M. Flouros, Z. Vlahostergios, A. Goulas, «Flow field and heat transfer investigations in the exhaust nozzle of a recuperative aero engine», 5th International Gas Turbine Conference, 27-28 October 2010, Brussels, Belgium.
  14. Missirlis, K. Yakinthos, A. Goulas, Z. Vlahostergios, S. Donnerhack, O. Seite, M. Flouros, «Hot nozzle optimization and heat exchanger loss modeling», European Workshop on New Aero Engine Concepts, Munich, 30 June-1 July 2010.
  15. Michailidis, F. Stergioudi, Omar Haidar, D. Missirlis, C. Albanakis, P. Psyllaki, S. Tsipas, Z. Vlahostergios, B. Granier, «Application of Ni-foam as volumetric solar receiver: Flow, thermal and micro-structural evaluation», SOLARPACES 2010, The CSP Conference: Electricity, Fuels and Clean Water from Concentrated Solar Energy.
  16. Martinopoulos, D. Missirlis, G. Tsilingiridis, K. Yakinthos and N. Kyriakis, «Investigation of the heat transfer behavior of a novel polymer solar collector», Third International Conference on Applied Energy – 16-18 May 2011 – Perugia, Italy.
  17. Bouzakis, F. Klocke, A. Tsouknidas, S. Kombogiannis, D. Missirlis, Z. Vlahostergios, A. Sideridis, K. Yakinthos, A. Tzevelekis, G. Stabiliev, S. Bolz, «Development of a ball valve with PVD coated metal-to-metal sealing mechanism», Proceedings of the 4th International Conference on Manufacturing Engineering (ICMEN), 3-5 October 2011, Thessaloniki, Greece.
  18. Dimitriadis, D. Missirlis, G. Martinopoulos, «Investigation of the performance of a horizontal axis wind turbine with the use of blade element momentum theory and CFD computations», EWEA 2014, Barcelona, Spain: Europe’s Premier Wind Energy Event.
  19. Goulas, S. Donnerhack, M. Flouros, D. Misirlis, Z. Vlahostergios, K. Yakinthos, «Thermodynamics cycle analysis, pressure loss and heat transfer assessment of a recuperative system for aero-engines», GT2014-26010, Proceedings of ASME Turbo Expo 2014: Turbine Technical Conference and Exposition GT2014 June 16 – 20, 2014, Düsseldorf, Germany.
  20. Salpingidou, D. Misirlis and K. Yakinthos, «Computational flow analysis and development of a surrogate model for the prediction of the fluid flow and the 3D flow effects around a propeller», 8th GRACM International Congress on Computational Mechanics Volos, 12 July – 15 July 2015.
  21. Yakinthos, D. Misirlis, Z. Vlahostergios, M. Flouros, S. Donnerhack, A. Goulas, «Best strategies for the development of a holistic porosity model for the heat exchanger for aero engine applications», GT2015-42408, Proceedings of ASME Turbo Expo 2015: Power for Land, Sea and Air GT2015 June 15-19, 2015, Montreal, Canada.
  22. Vlahostergios, D. Misirlis, M. Flouros, S. Donnerhack, K. Yakinthos, «Efforts to improve aero engine performance through the optimal design of heat recuperation systems targeting fuel consumption and pollutant emissions reduction», Proceedings of 12th European Conference on Turbo-machinery Fluid dynamics & Thermodynamics ETC12, Paper ID: ETC2017-356, April 3-7, 2017; Stockholm, Sweden.
  23. Salpingidou, D. Misirlis, Z. Vlahostergios, S. Donnerhack, M. Flouros, A. Goulas, K. Yakinthos, «Exergy analysis and performance assessment for different recuperative thermodynamic cycles for gas turbine applications», GT2017-63705, ASME Turbo Expo 2017: Turbo-machinery Technical Conference and Exposition GT2017, June 26-30, 2017, Charlotte, NC, USA.
  24. Vlahostergios, D. Misirlis, M. Flouros, C. Salpingidou, S. Donnerhack, A. Goulas, K. Yakinthos, «Development, numerical investigation and experimental validation of a new recuperator design for aero engines applications», GT2017-64362, ASME Turbo Expo 2017: Turbo-machinery Technical Conference and Exposition GT2017, June 26-30, 2017, Charlotte, NC, USA.

  • Μοσχίδης Νικόλαος (M.Sc.), Καθηγητής Εφαρμογών, με ειδίκευση στην «Τεχνολογία Συγκολλήσεων και την Εργαστηριακή Έρευνα Υλικών».

 

  • Μωυσιάδης Αναστάσιος (Ph.D. in Mechanical Engineering, Dr.–Ing.), Καθηγητής Α’ Βαθμίδας – Αντιπρύτανης Οικονομικών, Προ-γραμματισμού και Ανάπτυξης του ΤΕΙ Κεντρικής Μακεδονίας & Διευθυντής του ΠΜΣ με τίτλο «Renewable energy systems: Design, development and optimization», με γνωστικό αντικείμενο και ερευνητικό έργο στα «Στοιχεία Μηχανών – Ανυψωτικές & Μεταφορικές Μηχανές».

Δημοσιεύσεις σε διεθνούς κύρους επιστημονικά περιοδικά με κριτές

  1. Moissiadis, L. Tsioraklidis, «Theoretical Evaluation of Cottonseed Oil – Diesel Blends as automotive fuels via simulation of combustion on a ECFM3Z engine model», Int. J. for Engineering Designers & Analysts Benchmark, NAFEMS (National Agency for Finite Elements Methods and Structures) Benchmark, April 2008.
  2. Moissiadis, L. Tsioraklidis, «Calculation of the power loses in a diesel engine by using lubricants of different viscosity. A theoretical approach via simulation of combustion on an ECFM3Z engine model», Int. J. for Engineering Designers & Analysts Benchmark, NAFEMS Benchmark, June 2009.
  3. Sachanas, A. Moissiadis and A. Mihailidis, «Electrical Contact Resistance measurement in elastohydrodynamic contacts», Journal of Balkan Tribological Association 22, 32-47 (2016).
  4. Moissiadis, J. Eleftheriadis, «Cost optimization in composite structures», Int. J. for Engineering Designers & Analysts Benchmark NAFEMS Benchmark (2016).
  5. Moissiadis, B. Allilomis, «Structural optimization of the body of a bike», Int. J. for Engineering Designers & Analysts Benchmark, NAFEMS Benchmark (2016).
  6. Sachanas, A. Moissiadis and A. Mihailidis, «Metallic Contact of surfaces in elasto-hydrodynamic lubrication», Journal of Balkan Tribological Association (2016).
  7. Moissiadis, J. Eleftheriadis, «Reduction of friction of metallic surfaces, a FEM simulation study», Int. J. for Engineering Designers & Analysts Benchmark, NAFEMS Benchmark (2017).
  8. Moissiadis, E. Mimikos, «Structural and weight optimization of a tower crane», Int. J. for Engineering Designers & Analysts Benchmark, NAFEMS Benchmark (2017).
  9. Moissiadis, G. Tzionas, «Optimization of complex organic bone surfaces – the case of knee», Int. J. for Engineering Designers & Analysts Benchmark, NAFEMS Benchmark (2017).
  10. Moissiadis, J. Eleftheriadis, «Casting simulation of a long wind turbine blade», Int. J. for Engineering Designers & Analysts Benchmark, NAFEMS Benchmark (2018).
  11. Moissiadis and A. Mihailidis, «Temperature distribution on gear teeth of helical gears», Journal of Balkan Tribological Association (2018).

 

Δημοσιεύσεις σε πρακτικά διεθνών συνεδρίων με κριτές

  1. Moissiadis «Optimization of complex organic bone surfaces – shoulder arthroplasty», Int. Conference for Engineering Designers & Analysts, March 2017, Oxford Shire, UK.
  2. Moissiadis, «Structural optimization of a crane hook», Int. Conference for Engineering Designers & Analysts, March 2017, Oxford Shire, UK.
  3. Moissiadis, «Dynamics of joints with organic bone surfaces», Int. Conference for Engineering Designers & Analysts, April 2018, Copenhagen, Denmark.

 

  • Πανταζόπουλος Αθανάσιος (Ph.D. in Computer Science), Αναπληρωτής Καθηγητής, με γνωστικό αντικείμενο και ερευνητικό έργο στην «Πληροφορική».

Δημοσιεύσεις σε πρακτικά διεθνών συνεδρίων με κριτές

  1. Deligianni and A. Pantazopoulos, “A mathematical model for automatic pattern recognition on the structure of cancellous bone”, Proceedings of the AMSE International Conference on Modeling and Simulation – 1987.
  2. Deligianni and A. Pantazopoulos, “The structure detection in trabecular Bone through a pattern recognition method”, Proceedings of the IFIP International Conference on System Modeling and Optimization – 1987.
  3. Ivanchev, D. Kydros and A. Pantazopoulos “A computational study of an algorithm for finding the k most vital elements of s-t planar directed networks”, Proceedings of the 25th Jub. Sum. School on Applications of Mathematics in Engineering and Economics, 1999, Sozopol, Bulgaria, Heron Publishing House. (ISBN 954-580-094-1)
  4. Δ. Κύδρος, Β. Μαμούδης, Γ. Ναυροζίδης και Α. Πανταζόπουλος, “Συμπληρωματική εκπαίδευση από απόσταση αποφοίτων τριτοβάθμιων εκπαιδευτικών ιδρυμάτων τεχνολογικής κατεύθυνσης με χρήση τηλεματικής τεχνολογίας και τεχνολογίας πολυμέσων“, 2ο Διεθνές Συνέδριο “Τεχνολογίες της Πληροφορίας και της Επικοινωνίας στην Εκπαίδευση“, Πάτρα, 2000.

 

  • Σαγρής Δημήτριος (Ph.D. in Mechanical Engineering), Επίκουρος Καθηγητής, με γνωστικό αντικείμενο και ερευνητικό έργο στα «Βιομηχανικά Συστήματα Παραγωγής – Ρομποτική».

Δημοσιεύσεις σε διεθνούς κύρους επιστημονικά περιοδικά με κριτές

  1. Sagris, S. Mitsi, K.-D. Bouzakis, G. Mansour, «5-DOF robot base location optimization using a hybrid algorithm», Mecatronica, Vol.1, pp. 76-81, 2004.
  2. Sagris, S. Mitsi, K.-D. Bouzakis, G. Mansour, «Geometric design optimization of spatial RR robot manipulator using a hybrid algorithm», Acta Technica Napocensis, Series: Applied Mathematics and Mechanics, Romania, Vol. 47, No.2, pp. 717-722, 2004.
  3. Mitsi, K.-D. Bouzakis, G. Mansour, D. Sagris, G. Maliaris, «Off-line programming of an industrial robot for manufacturing», International Journal of Advanced Manufacturing Technology, Vol. 26, pp. 262-267, 2005.
  4. Mansour, K.-D. Bouzakis, D. Sagris, E. Varitis, M. Pappa, «Reverse engineering of parts using 3D measuring device (CMM) by means of sp-lines», Acta Technica Napocensis, Series: Applied Mathematics and Mechanics, Romania, Vol. 49, No.3, pp. 575-582, 2006.
  5. -D. Bouzakis, D. Pantermalis, K. Efstathiou, E. Varitis, N. Michailidis, D. Sagris, I. Mavroudis, K. Vasteli, J. Kastner, D. Salaberger, «Design and manufacturing aspects, related to a vaginal speculum of antiquity, investigated by computer tomographies», Journal of Archaeological Science, Vol. 35, pp. 633-642, 2008.
  6. Mitsi, K.-D. Bouzakis, D. Sagris, G. Mansour, «Determination of optimum robot base location considering discrete end-effect or positions by means of hybrid genetic algorithm», Robotics and Computer-Integrated Manufacturing, Vol. 24, pp. 50-59, 2008.
  7. Mitsi, K.-D. Bouzakis, D. Sagris, G. Mansour, «Robot optimization by means of a hybrid genetic algorithm», Bulleting University Petrol – Gaze of Ploiesti, Series: Technical, Romania, Vol. LX, No.3A, pp. 131-142, 2008.
  8. Mansour, S. Mitsi, K. D. Bouzakis, D. Sagris, E. Varitis, «Developed hybrid genetic algorithm for optimizing reverse engineering methods», International Journal of Modern Manufacturing Technologies, Vol. 2, No. 1/2010, pp. 43-48, ISSN 2067-3604, 2010.
  9. -D. Bouzakis, M. Batsiolas, D. Sagris, N. Michailidis, M. Pappa, E. Pavlidou, «Diffusion and oxidation phenomena at elevated temperatures in the contact area between hardened steel and various PVD coatings», Surface and Coatings Technology, Volume 205, Supplement 2, pp. S115-S118, 2011.
  10. Sagris, S. Mitsi, K.-D. Bouzakis, G. Mansour, «Spatial RRR robot manipulator optimum geometric design by means of a hybrid algorithm», The Romanian review precision mechanics, Optics & Mechatronics No. 39, pp. 141-144, 2011.
  11. Sagris, S. Mitsi, K.-D. Bouzakis, G. Mansour, «Optimum geometric design for robot arm with geometric restrictions by means of a hybrid algorithm», Journal of the Balkan Tribological Association 18 (3), pp. 325-333, 2012.
  12. -D. Bouzakis, D. Sagris, S. Kombogiannis, T. Papaefthimiou, V. Cambanis, A. Chatzinas, A. Linder, «Newly constructed basement reduces vibrations», ZKG International 65 (5), pp. 62-69, 2012.
  13. Mansour, D. Sagris, Ch. Tsiafis, S. Mitsi, K.-D. Bouzakis, «Evolution of a hybrid method for industrial manipulator design optimization», Journal of Production Engineering 16, No.1, pp. 35-38, 2013.
  14. Stergioudi, E. Kaprara, K. Simeonidis, D. Sagris, M. Mitrakas, G. Vourlias, N. Michailidis, «Copper foams in water treatment technology: removal of hexavalent chromium», Materials & Design Vol. 87, pp. 287–294, 2015.
  15. Korlos, O. Friderikos, G. Mansour, C. David, D. Sagris, «Orthogonal cutting of Ti6Al4V alloy using experimental and theoretical analysis», Applied Mechanics & Materials 809-810, pp. 183-188, 2015.
  16. Korlos, O. Friderikos, D. Sagris, C. David, G. Mansour, «Experimental analysis of Ti6Al4V orthogonal cutting», Key Engineering Materials, Trans Tech Publications 665, pp. 17-20, 2016.
  17. Mansour, K. Tzikas, D. Tzetzis, A. Korlos, D. Sagris, C. David, «Experimental and Numerical Investigation on the Torsional Behavior of Filament Winding-Manufactured Composite Tubes», Applied Mechanics & Materials 834, pp. 173-178, 2016.
  18. Michailidis, F. Stergioudi, P. Seventekidis, A. Tsouknidas, D. Sagris, «Production of porous copper with high surface area for efficient water purification», CIRP Journal of Manufacturing Science and Technology, Vol. 13, pp. 85-89, 2016.
  19. Korlos, D. Tzetzis, G. Mansour, D. Sagris, C. David, «The Delamination Effect of Drilling and Electro-Discharge Machining on the Tensile Strength of Woven Composites as Studied by X-ray Computed Tomography», Int. J. of Machining and Machinability of Materials, Vol. 18, No4, pp. 426-448, 2016.
  20. Tsouknidas, M. Pantazopoulos, D. Sagris, D. Fasnakis, S. Maropoulos, F. Arabatzi, N. Michailidis, «The effect of body mass on the shoe-athlete interaction», Applied Bionics and Biomechanics, Vol. 201, Article ID: 7136238, 2017.
  21. Mansour, D. Sagris, A. Tsagaris, «CMM path planning, position and orientation optimization using a hybrid algorithm», International Review of Mechanical Engineering (IREME), Vol. 11, N. 2, pp. 144-150, 2017.

 

Δημοσιεύσεις σε πρακτικά διεθνών συνεδρίων με κριτές

  1. Mitsi, K.-D. Bouzakis, G. Mansour, G. Maliaris, D. Sagris, «Off line programming of an industrial robot for welding», Proceedings of 3rd CIRP International Seminar of Intelligent Computation in Manufacturing Engineering, ICME, Ischia, Italy, pp. 557-562, 2002.
  2. Mitsi, K.-D. Bouzakis, G. Mansour, D. Sagris, G. Maliaris, «Off line programming of an industrial robot for manufacturing», Proceedings of the 1st International Conference on Manufacturing Engineering (ICMEN), October 3-4, Sani-Chalkidiki, Greece, pp. 769-776, 2002.
  3. Mitsi, K.-D. Bouzakis, D. Sagris, G. Mansour, «Optimization of robot base location using a hybrid genetic algorithm», Proceedings of 4th CIRP International Seminar of Intelligent Computation in Manufacturing Engineering, ICME, Sorrento, Italy, pp. 139-144, 2004.
  4. Mitsi, K.-D. Bouzakis, D. Sagris, G. Mansour, «A multi-objective optimum robot base placement using a hybrid genetic algorithm», International Symposium on Theory of Machines and Mechanisms, SYROM 2005, Bucharest, Vol.3, pp. 709-714, 2005.
  5. -D. Bouzakis, D. Pantermalis, K. Efstathiou, E. Varitis, N. Michailidis, I. Mavroudis,
    D. Sagris, A. Asimakopoulos, «Design and manufacturing aspects, related to a varinal speculum and to a carriage suspension head of antiquity, investigated by computer tomographies and FEM simulation techniques», 2nd International Conference on Manufacturing Engineering (ICMEN) and EUREKA Brokerage Event, October 5-7, Kallithea-Chalkidiki, Greece, pp. 3-22, 2005.
  6. Mitsi, K.-D. Bouzakis, D. Sagris, G. Mansour, «A multi-objective optimum robot base placement using a hybrid genetic algorithm», Proceedings of the 2nd International Conference on Manufacturing Engineering (ICMEN), October 5-7, Kallithea-Chalkidiki, Greece, pp. 341-349, 2005.
  7. Mitsi, K.-D. Bouzakis, D. Sagris, G. Mansour, «Geometric design optimization of spatial RR robot manipulator using a hybrid algorithm», Proceedings of the 2nd International Conference on Manufacturing Engineering (ICMEN), October 5-7, Kallithea-Chalkidiki, Greece, pp. 373-380, 2005.
  8. -D. Bouzakis, G. Mansour, E. Varitis, D. Sagris, «Processing of CMM point clouds by means of genetic algorithm for the solid modeling of parts and NC-code creation», Proceedings of the 2nd International Conference on Manufacturing Engineering (ICMEN), October 5-7, Kallithea-Chalkidiki, Greece, pp. 633-642, 2005.
  9. Mansour, K.-D. Bouzakis, D. Sagris, E. Varitis, «Reserve engineering of parts by means of polynomial curves», Proceedings of the 2nd International Conference on Manufacturing Engineering (ICMEN), October 5-7, Kallithea-Chalkidiki, Greece, pp. 653-660, 2005.
  10. Mansour, S. Mitsi, K.-D. Bouzakis, D. Sagris, E. Varitis, «Optimization of point clouds registration by means of a hybrid algorithm», Annals of “Dunarea de Jos” University of Galati, Fascicle XIV Mechanical Engineering, ISSN 1224-5615, pp. 5-10, 2005.
  11. Mitsi, K.-D. Bouzakis, D. Sagris, G. Mansour, «A multi-objective optimum robot placement using a hybrid genetic algorithm», Mechanisms and manipulators, ARoTMM – IFToMM, Vol.6, Nr.1, pp. 19-26, 2007.
  12. Mitsi, K.-D. Bouzakis, D. Sagris, G. Mansour, «Optimum collision free robot path planning using a hybrid genetic algorithm», International Conference on Manufacturing Systems, ICMS, October 18-19, Iasi-Romania, pp. 369-376, 2007.
  13. Mitsi, K.-D. Bouzakis, D. Sagris, G. Mansour, «Robot path planning optimization, free of collisions, using a hybrid algorithm», Proceedings of the 3rd International Conference on Manufacturing Engineering (ICMEN), October 1-3, Kallithea-Chalkidiki, Greece, pp. 475-484, 2008.
  14. -D. Bouzakis, D. Sagris, S. Kombogiannis, Th. Papaefthimiou, V. Cambanis, «Vibrations reduction of industrial fans by optimizing their foundation», Proceedings of the 4th International Conference on Manufacturing Engineering (ICMEN), October 3-5, Thessaloniki, Greece, pp. 187-196, 2011.
  15. -D. Bouzakis, D. Sagris, S. Kombogiannis, Th. Papaefthimiou, V. Cambanis, A. Linder, «Cement mill driving pinion housing basement optimizing for vibrations decreasing», Proceedings of the 4th International Conference on Manufacturing Engineering (ICMEN), October 3-5, Thessaloniki, Greece, pp. 215-224, 2011.
  16. Sagris, S. Mitsi, K.-D. Bouzakis, G. Mansour, «Optimum geometric design for robot arm with geometric restrictions by means of a hybrid algorithm», Proceedings of the 4th International Conference on Manufacturing Engineering (ICMEN), October 3-5, Thessaloniki, Greece, pp. 459-466, 2011.
  17. -D. Bouzakis, M. Batsiolas, D. Sagris, N. Michailidis, M. Pappa, E. Pavlidou, «Diffusion and oxidation phenomena at elevated temperatures in the contact area between hardened steel and various PVD coatings», Proceedings of the 9th International Conference THE “A” Coatings in Manufacturing Engineering, October 3-5, Thessaloniki, Greece, pp. 327-334, 2011.
  18. David, A. Antoniadis, O. Friderikos, D. Sagris, «Experimental and computational investigation of end-milling and development of a simulation model describing the machining process», Proceedings of the 7th International Conference “New Horizons in Industry, Business and Education” (NHIBE 2011), 25-26 August 2011, Chios Island, Greece, pp. 538-543, 2011.
  19. Tsagaris, D. Sagris, G. Mansour, «Intelligent C.A.D. based system for C.N.C. machine controlling by genetic algorithms», INES 2012 – IEEE 16th International Conference on Intelligent Engineering Systems, Proceedings, art. no. 6249837, pp. 235-239, 2012.
  20. Mansour, A. Tsagaris, D. Sagris, «CNC machining optimization by genetic algorithms using CAD-based system», Proceedings of the 3rd International Conference on Diagnosis and Prediction in Mechanical Engineering Systems (DIPRE 12), May 31 – June 1, Galati, Romania, pp. 1-6, 2012.
  21. Mansour, D. Sagris, Ch. Tsiafis, S. Mitsi, K.-D. Bouzakis, «Evolution of a hybrid method for industrial manipulator design optimization», ΜΜΑ2012, Proceedings of the 11th International Scientific Conference of Novi Sad, September 20-21, Novi Sad, Serbia, pp. 247-250, 2012.
  22. Varitis, D. Sagris, C. David, A. Lontos, «Directional variation of trabecular bone in the femoral head, a μ-CT based approach», Proceedings of the International Conference on Bioinformatics Models, Methods and Algorithms, Bio-Informatics 2013, Barcelona – Spain, 11 – 14 February, pp. 237-241, 2013.
  23. Korlos, D. Tzetzis, G. Mansour, D. Sagris, C. David, «Comparison of drilling and electro-discharge open-hole machining of carbon fiber reinforced polymers», 5th International Conference on Manufacturing Engineering (ICMEN), Thessaloniki, Greece, 1-3 Oct. 2014, pp. 41-50, 2014.
  24. Mansour, D. Sagris, «3D path planning and simulation for off-line programming of Coordinate Measuring Machines», 5th International Conference on Manufacturing Engineering (ICMEN), Thessaloniki, Greece, 1-3 Oct. 2014, pp. 171-178, 2014.
  25. Korlos, O. Friderikos, C. David, G. Mansour, D. Sagris, «Adiabatic shear band formation in orthogonal machining of Ti6Al4V», 4th International Conference of Engineering Against Failure (ICEAF IV), Skiathos, Greece, 24-26 June 2015.
  26. Friderikos, A. Korlos, C. David, D. Sagris, G. Mansour, «Formation of adiabatic shear bands in orthogonal machining of Ti6Al4V alloy», 8th GRACM International Congress on Computational Mechanics, Volos, Greece, 12-15 July 2015.
  27. David, D. Sagris, E. Stergianni, Ch. Tsiafis, I. Tsiafis, «Experimental analysis of charter vibration on micro milling», CONFERENG 2016, Targu-Jiu, November 4-5, 2016.
  28. Toulfatzis, G. A. Pantazopoulos, C. David, D. Sagris, A. Paipetis, «Design of experiments for the optimization of cutting force and surface roughness of lead-free brass alloys», International Conference EUROMAT 2017, 17-22 September 2017, Thessaloniki, Greece.
  29. Stergianni, D. Sagris, C. Tsiafis, C. David, I. Tsiafis, «Influence analysis of micro-milling vibration phenomena on work-piece topomorphy», 9th International Congress on Precision Machining ICPM 2017 September 6-9, 2017 Athens, Greece.
  30. Sagris, C. David, E. Stergianni, C. Tsiafis, I. Tsiafis, «Computational and experimental analysis of machine tool vibrations in micro-milling», International Conference on Innovative Manufacturing Engineering and Energy IManE&E, May 25-26 Iaşi Romania, 2017.
  31. Stergianni, C. Tsiafis, D. Sagris, C. David, I. Tsiafis, «Computational and experimental analysis of machine tool vibrational phenomena in micro-milling process and their influence on work-piece topomorphy», 6th International Conference on Manufacturing Engineering ICMEN, 5-6 October 2017 Thessaloniki, Greece.

  • Σοφιαλίδης Δημήτριος (Ph.D. in Computational Fluid Dynamics), Αναπληρωτής Καθηγητής, με γνωστικό αντικείμενο και ερευνητικό έργο στη «Μηχανική Ρευστών – Υδροδυναμικές Μηχανές».

 

Δημοσιεύσεις σε διεθνούς κύρους επιστημονικά περιοδικά με κριτές

  1. Faltsi, O., Vlaev, S. D., Sofialidis, D. & Kirpitsas, J. (2006) «Novel Areas and Future Trends of Computational Fluid Dynamics Software Applications in Chemical Engineering», Chemical Industry and Chemical Engineering Quarterly, 12(4), pp. 213-219.
  2. Skodras, G., Kaldis, S.P., Sofialidis, D., Faltsi, O., Grammelis, P. & Sakellaropoulos, S. P. (2006) «Particulate Removal via Electrostatic Precipitators-CFD Simulation», Fuel Processing Technology, 87(7), pp. 623-631.
  3. Sofialidis, D., Faltsi, O., Sardi, K., Skevis, G., Skodras, G., Kaldis, S. P. & Sakellaropoulos, G. P. (2005) «Modeling Low-Temperature Carbonization of Solid Fuels in a Heated Rotary Kiln for Clean Fuel Production», Fuel, 84(17), pp. 2211-2221.
  4. Skodras, G., Kaldis, S. P., Sakellaropoulos, G. P., Sofialidis, D. & Faltsi, O. (2003) «Simulation of a Molten Bath Gasifier by Using a CFD Code», Fuel, 82(15–17)), pp. 2033–2044.
  5. Prinos, P., Sofialidis, D. & Keramaris E. (2003) «Turbulent Flow Over and Within a Porous Bed», J. of Hydraulic Eng., ASCE, 129(9), pp. 720–733.
  6. Sofialidis, D. & Faltsi, O. (2001) «Simulation of Biomass Gasification in Fluidized Beds using Computational Fluid Dynamics Approach», J. Thermal Science, 5(2), pp. 95-
  7. Sofialidis, D. & Prinos, P. (1999) «Turbulent Flow in Open Channels with Smooth and Rough Flood Plains», J. of Hydraulic Res., IAHR, 37(5), pp. 615-
  8. Sofialidis, D. & Prinos, P. (1999) «Numerical Study of Momentum Exchange in Compound Open Channel Flow», J. of Hydraulic Eng., ASCE, 125(2), pp. 152-
  9. Sofialidis, D. & Prinos, P. (1998) «Compound Open–Channel Flow Modeling with Nonlinear Low–Reynolds k–ε Models», J. of Hydraulic Eng., ASCE, 124(3), pp. 253-
  10. Sofialidis, D. & Prinos, P. (1997) «Fluid Flow and Heat Transfer in a Pipe with Wall Suction», Int. J. of Heat and Mass Transfer, 40(15), pp. 3627-
  11. Sofialidis, D. & Prinos, P. (1996) «Wall Suction Effects on the Structure of Fully Developed Turbulent Pipe Flow», J. of Fluids Eng., ASME, 118, pp. 33-

 

Δημοσιεύσεις σε πρακτικά διεθνών συνεδρίων με κριτές

  1. Prinos, P. & Sofialidis, D. (2003) «Turbulent Flow over Periodic Hills», XXX IAHR Cong., Thessaloniki, Greece, August 24-29, pp. 655–662.
  2. Soulis, J. V., Farmakis, T. M., Giannoglou, G. D., Fatsi, O., Sofialidis, D., Josipovic, J. & Louridas, G. E. (2003) «Computational Hemodynamic of Left Coronary Artery», Biomedicine 2003, Ljubljana, Slovenia, April 2-4, pp. 189–198.
  3. Sofialidis, D., Faltsi, O. & Katsanevakis, A. (2001) «Simulation of Biomass Gasification for Energy Production in Fluidized Beds using the Computational Fluid Dynamics Code FLUENT», 3rd Symposium of South–East European Countries (SEEC) on Fluidized Beds in Energy Production, Chemical and Process Eng. and Ecology, Sinaia, Romania, Sep. 25-29, pp. 261–268.
  4. Sofialidis, D., Faltsi, O. & Oprea, C. (2001) «Thermal Analysis of a Heated Cylinder at Cross Flow using the CFD Package ICEPAK3», 7th Int. Symposium Design & Technology of Electronic Modules, Bucharest, Romania, Sep. 20–23, pp. 21–26.
  5. Kaldis, S. P., Sakellaropoulos, G. P., Sofialidis, D. & Faltsi, O. (2001) «Modeling of Gas Separation Hollow Fiber Membrane Modules. One–Dimensional and Computational Fluid Dynamics (CFD) Approach», Eng. with Membranes, Granada, Spain, Jun. 3-6, paper C.2–3.
  6. Sofialidis, D. & Prinos, P. (2001) «Microscopic Modeling of Turbulent Flow Over and Within a Porous Bed», XXIX IAHR Congress, Beijing, China, September 16-21, pp. 888–895.
  7. Katsanevakis, Α., Tsemberlidis, P., Fletcher, L., Pourkashanian, M., Sofialidis, D., Katsanevakis, J. & Lappas, A. (2000) «Application of the Decentralized Combustion Mode with Turbine Exhaust Gases–DCM/TEG–Cycle in the Glass Industry. A Novel Approach for CHP Integration in High Temperature Demanding Processes», Proc. 1st Balkan Conf. on Glass Science & Technology, Volos, Greece, Oct. 9–10, pp. 410-
  8. Sofialidis, D. & Prinos, P. (1997). “Development of a Non–Linear Strain–Sensitive k–ω Turbulence Model”, Proc. 11th Symposium on Turbulent Shear Flows, Grenoble, France, Sep. 8-10, Vol. 2, pp. 89-P2.94.
  9. Sofialidis, D. & Prinos, P. (1996) «Secondary Currents and Turbulence in Compound Open Channel Flow», Proc. 6th Symposium on Flow Modeling and Turbulence Measurements, Tallahassee, Florida, U.S.A., Sep. 8-10, pp. 711-718.
  10. Sofialidis, D. & Prinos, P. (1995) «Fluid Flow and Heat Transfer in a Pipe with Wall Suction», Proc. XXVI IAHR Cong., London, U.K., September. 11-15, pp. 83-
  11. Sofialidis, D. & Prinos, P. (1995) «Turbulence Modeling of Steep Open Channel Flow», Proc. 9th Conf. on Numerical Methods in Laminar and Turbulent Flow, Atlanta, Georgia, U.S.A., Jul. 10-14, pp. 893-904.
  12. Sofialidis, D. & Prinos, P. (1994) «Near Wall Turbulence under the Influence of Intensive Mass Transfer», Proc. Int. Symposium on Turbulence, Heat and Mass Transfer, Lisbon, Portugal, Aug. 9-12, pp. 122-
  13. Voulgaris, P., Sofialidis, D., Fotea, K., Prinos, P. & Goulas, A. (1992) «Three–Dimensional Flow in Complex Rooms», Proc. 3rd Conf. on Energy and Building in the Mediterranean Area, Thessaloniki, Greece, Apr. 8-10, pp. 207-214.

 

  • Χασάπης Δημήτριος (Ph.D. in Applied Physics), Καθηγητής Α’ Βαθμίδας – Πρύτανης του ΤΕΙ Κεντρικής Μακεδονίας, με γνωστικό αντικείμενο και ερευνητικό έργο στη «Φυσική – Θερμοδυναμική».

Δημοσιεύσεις σε διεθνούς κύρους επιστημονικά περιοδικά με κριτές

  1. C. Vlachou, J. S. Lioumbas, C. David, D. Chasapis, T. D. Karapantsios, «Effect of channel height and mass flux on highly sub-cooled horizontal flow boiling», Exp. Thermal and Fluid Science 83 157-168 (2017).
  2. Sakonidou, E. P., Karapantsios, T. D., Balouktsis, A. I., Chassapis, D., «Corrigendum to “Modeling of the optimum tilt of a solar chimney for maximum air flow» [Sol. Energy 82 (2008) 80-94]”, Solar Energy 86 (2): 809 (2012).
  3. P. Sakonidou, T. D. Karapantsios, A. I. Balouktsis, D. Chassapis, «Modeling of the optimum tilt of a solar chimney for maximum air flow», Solar Energy 82, 80-94 (2008).
  4. Chassapis, T. D. Karapantsios, A. Balouktsis, «Incorporation of hydrodynamic interaction forces to molecular statistical theory of temporary polymer networks in solution», European Polymer Journal 43, 3236-3249 (2007).
  5. Chassapis, A. Balouktsis, T. D. Karapantsios, «Flow birefringence of temporary polymer networks», European Polymer Journal 38, 1071-1078 (2002).
  6. Vlachos, T. D. Karapantsios, A. Balouktsis, D. Chassapis, «Design and testing of a new solar tray dryer», Drying Technology 20(6): 1243-1271 (2002).
  7. Balouktsis, D. Chassapis, T. D. Karapantsios, «A nomogram method for estimating the energy produced by wind turbine generators», Solar Energy 72(3), 251-259 (2002).
  8. Babos, D. Chassapis, «The calculation of the effective values of physical properties for random composites with circular inclusions», J. Phys. Solids 51, 209-215 (1990).
  9. Chassapis, G. Babos, R. Takserman-Krozer, Ε. Kröner, «Statistical mechanics of temporary polymer networks», Rheological Acta 28, 193-201 (1989).
  10. Ε. Kröner, D. Chassapis, R. Takserman-Krozer, «The physics of temporary polymer networks: a comparison of theory and experiment», Biological and Synthetic Polymer Networks, pp 185-205, O. Kramer (ed.), Elsevier Applied Science, London:1988. 

Δημοσιεύσεις σε πρακτικά διεθνών συνεδρίων με κριτές

  1. Panagopoulos, E. Kirtas, K. Mimidis, I. Sous, A. Kappos, I. Lialiampis & D. Chassapis, “Inventory of the building stock in the city of Serres (Greece) for seismic vulnerability assessment and loss estimation”, 10th International Conference on Earthquake Resistant Engineering Structures, Opatija-Croatia, 29 June – 1 July 2015.
  2. D. Karapantsios, A. I. Balouktsis, D. Chassapis, M. D. Petala, “A CFD model to estimate the effect of tilt and height on the natural air flow inside a solar chimney”, WSEAS conference, Venice – Italy, 21-23 November 2007.
  3. Balouktsis, A. Balouktsis, T. D. Karapantsios, D. Chassapis, C. David, K. Anastasiou “Load matching and optimization of directly coupled PV to water chillers pumping systems”, WSEAS conference, Venice – Italy, 21-23 November 2007.
  4. E. Theodoridou, D. Chassapis, A. Balouktsis, “The newly founded Department of Informatics in Serres: Its purpose and structure”, 3rd Global Congress on Engineering Education, Congress Proceedings, UICEE, ISBN: 0 7326 2201 8, p.p. 359-362 Glasgow Caledonian University 30 June – 5 July 2002.
  5. Α. Μπαλουκτσής, Δ. Χασάπης, Θ. Καραπάντσιος, «Δημιουργία Νομογράμματος για τον Υπολογισμό της Μέσης Παραγόμενης Ισχύος μιας Ανεμογεννήτριας», Τεχνολογίες Ήπιων Μορφών Ενέργειας και Περιβάλλοντος, pp. 187-195, Αθήνα 11-12 Δεκεμβρίου 2000.

Εργασίες σε διεθνούς κύρους επιστημονικά περιοδικά με κριτές: 226

Εργασίες σε πρακτικά διεθνών συνεδρίων με κριτές: 213


 

-O-

Πρόεδρος του Τμήματος

Κλεΐδης Κώστας

Αναπληρωτής Καθηγητής

 

 

 
Scroll Up